Owner's Manual

2504 CHAPTER 166: POE CONFIGURATION COMMANDS
poe pse-policy priority
Syntax poe pse-policy priority
undo poe pse-policy priority
View System view
Parameter None
Description Use the
poe pse-policy priority command to configure a PSE power
management priority policy.
Use the
undo poe pse-policy priority command to remove the PSE power
management priority policy.
By default, no PSE power management priority policy is configured.
Example # Configure a PSE power management priority policy.
<Sysname> system-view
[Sysname] poe pse-policy priority
poe update
Syntax poe update { full | refresh } filename [ pse pse-id ]
View System view
Parameter full: Specifies to upgrade the PSE processing software in full mode when the
software is unavailable.
refresh: Specifies to upgrade the PSE processing software in refresh mode when
the software is available.
filename: Name of the upgrade file, a string of 1 to 64 characters. This file must be
under the root directory of the file system of the device. The extension of the
upgrade file varies with devices.
pse pse-id: Specifies a PSE ID. The support for this argument varies with devices.
pse-id indicates number of the slot where a PoE interface locates.
Description Use the
poe update command to upgrade the PSE processing software online.
Example # Upgrade the processing software of PSE 2 online
<Sysname> system-view
[Sysname] poe update refresh 0400_001.S19 pse 2