Owner's Manual

2716 CHAPTER 179: VOFR CONFIGURATION COMMANDS
timestamp
Syntax timestamp
undo timestamp
View VoFR entity view
Parameter None
Description Use the
timestamp command to configure VoFR packets sent by the local voice
gateway to carry a timestamp.
Use the
undo timestamp command to restore the default.
By default, the VoFR packets sent by the local voice gateway do not carry any
timestamp.
Example # Configure voice packets sent by VoFR entity 10 to carry a timestamp.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 vofr
[Sysname-voice-dial-entity10] timestamp
trunk-id
Syntax trunk-id string
undo trunk-id
View VoFR entity view
Parameter string: PSTN-dialed number, a string of 1 to 31 characters.
Description Use the
trunk-id command to a PSTN-dialed number in the FRF.11 trunk mode.
Use the
undo trunk-id command to restore the default.
By default, no PSTN-dialed number is configured in the FRF.11 trunk mode.
Related command: call-mode.
Example # Configure the PSTN-dialed number 3333 for VoFR entity 2222 in the FRF.11
trunk mode.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program