Owner's Manual

531
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi
ppp mp lfi delay-per-frag
Syntax ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
View Virtual template interface view, MP-group interface view, dialer interface view
Parameter time: Maximum time delay of LFI fragment in ms, in the range 1 to 1000.
Description Use the
ppp mp lfi delay-per-frag command to set the maximum time delay
for transmitting a LFI fragment.
Use the
undo ppp mp lfi delay-per-frag command to restore the default
value, or 10 ms.
Example # Set the maximum time delay of LFI fragment of Virtual-Template1 to 20 ms.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi delay-per-frag 20
reset ppp compression iphc
Syntax reset ppp compression iphc [ interface-type interface-number ]
View User view
Parameter Interface-type Interface-number: Specifies an Interface by its type and number.
Description Use the
reset ppp compression iphc command to delete IP header
compression statistics.
If the interface-type and interface-number arguments are not specified, the IP
header compression statistics on all interfaces will be cleared.
Example # Reset statistics about IP header compression on all interfaces.
<Sysname> reset ppp compression iphc