Owner's Manual

37
ISDN CONFIGURATION COMMANDS
dialer isdn-leased (ISDN BRI interface view)
Syntax dialer isdn-leased { 128k | number }
undo dialer isdn-leased { 128k | number }
View ISDN BRI interface view
Parameter 128k: 128 kbps ISDN leased line connection.
number: 64 kbps ISDN leased line connection. It can be 0 for the first B channel or
1 for the second B channel.
Description Use the
dialer isdn-leased 128k command to configure 128 kbps leased line
connection.
Use the
undo dialer isdn-leased 128k command to remove 128 kbps leased
line connection.
Use the
dialer isdn-leased number command to configure 64 kbps leased line
connection.
Use the
undo dialer isdn-leased number command to remove 64 kbps leased
line connection.
By default, no ISDN leased line connection is configured.
You must manually remove the existing leased line configuration before switching
from single B channel leased line to 128 kbps leased line.
n
■ You cannot configure this command on the BRI interfaces provided by 2S1B
modules.
■ For more information about configuring ISDN leased lines on CE1/PRI and
CT1/PRI interfaces, refer to “dialer isdn-leased (physical interface view)” on
page 320.
Example # Configure 128 kbps leased line connection.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] dialer isdn-leased 128k