Owner's Manual

947
Examples # Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table’s Status : < Active >
Summary Count : 1
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Direct Routing Table’s Status : < Inactive >
Summary Count : 0
Refer to Table 209 for description about the above output.
display ipv6 routing-table statistics
Syntax display ipv6 routing-table statistics
View Any view
Parameters None
Description Use the
display ipv6 routing-table statistics command to display routing
statistics, including total route number, added route number and deleted route
number.
Examples # Display routing statistics.
<Sysname> display ipv6 routing-table statistics
Protocol route active added deleted freed
DIRECT 1 1 1 0 0
STATIC 3 0 3 0 0
RIPng 0 0 0 0 0
OSPFv3 0 0 0 0 0
IS-ISv6 0 0 0 0 0
BGP4+ 0 0 0 0 0
Total 4 1 4 0 0
Table 210 Description on the fields of the display ipv6 routing-table statistics command
Field Description
Protocol Routing protocol
route Route number of the protocol
active Active route number
added Routes added after the last startup of the router
deleted Deleted routes, which will be released after a specified time
freed Released (totally removed from the routing table) route number
Total Total route number