- 3com Network Interface Card User Guide
Table Of Contents
- About This Guide
- Introduction
- Overview
- 3CR990 NIC Features
- DynamicAccess LAN Agent
- Windows2000 Offload Features
- Installing and Connectingthe NIC
- Installing NICDrivers in Windows
- Installing DynamicAccess Software in Windows
- Overview
- Installing the DynamicAccess LAN Agent for a Client NIC
- Installing DynamicAccess Software for a Server NIC
- Configuring Groups and VLANs for a Server NIC
- Planning the Configuration
- Working With Server Features
- Creating a Group
- Adding NICs to a Group
- Specifying a Dedicated IP Address
- Changing an IP Address
- Creating a VLAN
- Specifying Traffic Priorities
- Saving the Configuration
- Disabling Load Balancing for a Group
- Changing the Primary NIC
- Removing a NIC from a Group
- Deleting or Editing a VLAN
- Displaying NIC Properties
- Displaying Group Properties
- Specifying Failover from Gigabit to 10/100 PCI
- Troubleshooting a Load Balancing Configuration
- Changing Windows2000 Property Settings
- Identifying Windows 2000 Miniport and LAN Connections
- Using Windows2000 Offload Features
- Installing DynamicAccess LAN Encryption Software
- Installing NetWare Client and ServerDrivers
- Overview
- Installing and Configuring the NetWare Server Driver
- Using the Latest Support Packs
- Obtaining NetWare Loadable Modules
- Server Software Installation Requirements
- Installing the NetWare 3.12 Server Driver
- Installing the Server Driver for NetWare 4.11 and 5.0 UsingINETCFG
- Installing the Server Driver and DynamicAccess Technology Using AUTOEXEC.NCF
- Installing Multiple Server NICs
- Verifying the PCI Slot Number
- Installing Server Features
- Configuring Groups
- Verifying the Installation and Configuration
- Changing NetWare Driver Configuration Parameters
- Maintaining Groups
- Configuring the NIC
- Configuring IP Security
- Troubleshooting the NIC
- Running NIC Diagnostics
- Obtaining Drivers
- Specifications and CablingRequirements
- Installing the 3ComDMIAgent
- EtherCD Content and Navigation
- Installing a 3Com NIC While Installing the NOS
- Technical Support
- Index
- FCC Class B Statement
- FCC Declaration of Conformity
- Industry Canada Class B Emission ComplianceStatement
- Avis de Conformité à la Réglementation d’IndustrieCanada
- VCCI Class B Statement
- 3Com End User Software License Agreement
- Product Registration
Installation Overview 77
Installing LAN Encryption Software on Windows 95 77
Installing LAN Encryption Software on Windows 98 82
Adding the Entrust File 85
Starting DynamicAccess LAN Encryption Software 86
Viewing the Administrator’s Guide Online 86
Uninstalling LAN Encryption Software 87
5
I
NSTALLING
N
ET
W
ARE
C
LIENT
AND
S
ERVER
D
RIVERS
Overview 89
Installing and Configuring the NetWare Server Driver 89
Using the Latest Support Packs 89
Obtaining NetWare Loadable Modules 90
Server Software Installation Requirements 91
Netware Packet Receive Buffers 91
Slot Numbers for Multiple NICs 91
Obtaining Slot Numbers 92
Installing the NetWare 3.12 Server Driver 92
Installing the Server Driver for NetWare 4.11 and 5.0
Using INETCFG 93
Installing the Server Driver and DynamicAccess Technology
Using AUTOEXEC.NCF 95
Loading the 3Com EtherCD 96
Copying the Driver 96
Specifying the Slot Number 97
Loading the Driver 97
Setting Up Another NIC 97
Installing Multiple Server NICs 98
Verifying the PCI Slot Number 99
Installing Server Features 99
Configuring Groups 100
Verifying the Installation and Configuration 102
Changing NetWare Driver Configuration Parameters 103
Maintaining Groups 104
Planning the Configuration 104
Adding a Secondary NIC to a Group 105
Adding a Group 106
Server Feature Commands 108
group 108
display status 108