- 3com Network Interface Card User Guide
Table Of Contents
- About This Guide
- Introduction
- Overview
- 3CR990 NIC Features
- DynamicAccess LAN Agent
- Windows2000 Offload Features
- Installing and Connectingthe NIC
- Installing NICDrivers in Windows
- Installing DynamicAccess Software in Windows
- Overview
- Installing the DynamicAccess LAN Agent for a Client NIC
- Installing DynamicAccess Software for a Server NIC
- Configuring Groups and VLANs for a Server NIC
- Planning the Configuration
- Working With Server Features
- Creating a Group
- Adding NICs to a Group
- Specifying a Dedicated IP Address
- Changing an IP Address
- Creating a VLAN
- Specifying Traffic Priorities
- Saving the Configuration
- Disabling Load Balancing for a Group
- Changing the Primary NIC
- Removing a NIC from a Group
- Deleting or Editing a VLAN
- Displaying NIC Properties
- Displaying Group Properties
- Specifying Failover from Gigabit to 10/100 PCI
- Troubleshooting a Load Balancing Configuration
- Changing Windows2000 Property Settings
- Identifying Windows 2000 Miniport and LAN Connections
- Using Windows2000 Offload Features
- Installing DynamicAccess LAN Encryption Software
- Installing NetWare Client and ServerDrivers
- Overview
- Installing and Configuring the NetWare Server Driver
- Using the Latest Support Packs
- Obtaining NetWare Loadable Modules
- Server Software Installation Requirements
- Installing the NetWare 3.12 Server Driver
- Installing the Server Driver for NetWare 4.11 and 5.0 UsingINETCFG
- Installing the Server Driver and DynamicAccess Technology Using AUTOEXEC.NCF
- Installing Multiple Server NICs
- Verifying the PCI Slot Number
- Installing Server Features
- Configuring Groups
- Verifying the Installation and Configuration
- Changing NetWare Driver Configuration Parameters
- Maintaining Groups
- Configuring the NIC
- Configuring IP Security
- Troubleshooting the NIC
- Running NIC Diagnostics
- Obtaining Drivers
- Specifications and CablingRequirements
- Installing the 3ComDMIAgent
- EtherCD Content and Navigation
- Installing a 3Com NIC While Installing the NOS
- Technical Support
- Index
- FCC Class B Statement
- FCC Declaration of Conformity
- Industry Canada Class B Emission ComplianceStatement
- Avis de Conformité à la Réglementation d’IndustrieCanada
- VCCI Class B Statement
- 3Com End User Software License Agreement
- Product Registration
Installing DynamicAccess LAN Encryption Software 79
8 If you need to close any open applications, click
Cancel, close the applications, and then restart the
installation process. (Alternatively, you can press
Ctrl-Tab to display each open application and close it.)
Once you are ready to proceed, click Next.
The Software License Agreement screen appears.
9 Click Yes to continue.
The Setup Type screen appears, offering you a Typical or
Custom installation.
■ Typical—the program will be installed without the
online user guide.
■ Custom—you can choose which components to install.
This choice allows you to download and view the
DynamicAccess LAN Encryption Software
Administrator’s Guide.
10 Select Custom Installation to install the
DynamicAccess LAN Encryption software and to
download the user guide to your computer’s hard
drive. Click Next to continue.
The Select Components screen appears, allowing you to
choose the components to be installed.
11 Select both components: DynamicAccess LAN
Encryption Software and Admin Documentation.
Click Next.
The DynamicAccess LAN encryption software screen
appears.
12 Verify that the displayed destination folder is correct
for installation on your computer. Use the Browse
button if necessary to change the destination folder.
Once the appropriate destination folder is displayed,
click Next.
The Start Copying Files screen appears, displaying the
components that will be installed.
Installing the DynamicAccess LAN Encryption software
from a login script is not supported.