- 3com Network Interface Card User Guide
Table Of Contents
- About This Guide
- Introduction
- Overview
- 3CR990 NIC Features
- DynamicAccess LAN Agent
- Windows2000 Offload Features
- Installing and Connectingthe NIC
- Installing NICDrivers in Windows
- Installing DynamicAccess Software in Windows
- Overview
- Installing the DynamicAccess LAN Agent for a Client NIC
- Installing DynamicAccess Software for a Server NIC
- Configuring Groups and VLANs for a Server NIC
- Planning the Configuration
- Working With Server Features
- Creating a Group
- Adding NICs to a Group
- Specifying a Dedicated IP Address
- Changing an IP Address
- Creating a VLAN
- Specifying Traffic Priorities
- Saving the Configuration
- Disabling Load Balancing for a Group
- Changing the Primary NIC
- Removing a NIC from a Group
- Deleting or Editing a VLAN
- Displaying NIC Properties
- Displaying Group Properties
- Specifying Failover from Gigabit to 10/100 PCI
- Troubleshooting a Load Balancing Configuration
- Changing Windows2000 Property Settings
- Identifying Windows 2000 Miniport and LAN Connections
- Using Windows2000 Offload Features
- Installing DynamicAccess LAN Encryption Software
- Installing NetWare Client and ServerDrivers
- Overview
- Installing and Configuring the NetWare Server Driver
- Using the Latest Support Packs
- Obtaining NetWare Loadable Modules
- Server Software Installation Requirements
- Installing the NetWare 3.12 Server Driver
- Installing the Server Driver for NetWare 4.11 and 5.0 UsingINETCFG
- Installing the Server Driver and DynamicAccess Technology Using AUTOEXEC.NCF
- Installing Multiple Server NICs
- Verifying the PCI Slot Number
- Installing Server Features
- Configuring Groups
- Verifying the Installation and Configuration
- Changing NetWare Driver Configuration Parameters
- Maintaining Groups
- Configuring the NIC
- Configuring IP Security
- Troubleshooting the NIC
- Running NIC Diagnostics
- Obtaining Drivers
- Specifications and CablingRequirements
- Installing the 3ComDMIAgent
- EtherCD Content and Navigation
- Installing a 3Com NIC While Installing the NOS
- Technical Support
- Index
- FCC Class B Statement
- FCC Declaration of Conformity
- Industry Canada Class B Emission ComplianceStatement
- Avis de Conformité à la Réglementation d’IndustrieCanada
- VCCI Class B Statement
- 3Com End User Software License Agreement
- Product Registration
86 CHAPTER 4: INSTALLING DYNAMICACCESS SOFTWARE IN WINDOWS
Starting DynamicAccess LAN Encryption Software
You start the DynamicAccess LAN Encryption software by
choosing a secure profile.
1 Right-click the padlock icon in the taskbar to see the
secure profiles on your system.
2 Select the secure profile you want to use from
the list.
■ If your organization is set up to use certificates to
authenticate the users on the network, you are
prompted to provide your user name and password.
Find your name in the User File list and provide your
password in this dialog box.
■ If your organization is not using certificates to
authenticate users, you are prompted to provide the
shared secret for the connection. A shared secret
must be agreed upon between you and the system
to which you are connecting to secure the data
communication.
3 To switch to a different secure profile, right-click the
padlock icon in the taskbar and select a different
profile. The profile in use displays a check mark next
to it.
You will be prompted to enter your user name and
password for certificate authorization, or provide a shared
secret when you switch to a different secure profile.
For further information, view the online DynamicAccess
LAN Encryption Software Administrator’s Guide, as
described in the next section.
Viewing the Administrator’s Guide Online
The EtherCD containing the DynamicAccess LAN
Encryption software also contains an online software
administrator’s guide in WebHelp format. You can view the
guide with the following recommended Internet browsers,
which are freely available on the Internet or from the
manufacturer on CD:
■ Microsoft Internet Explorer Version 4 or later
■ Netscape Navigator Version 4.03 or later