- 3com Network Interface Card User Guide
Table Of Contents
- About This Guide
- Introduction
- Overview
- 3CR990 NIC Features
- DynamicAccess LAN Agent
- Windows2000 Offload Features
- Installing and Connectingthe NIC
- Installing NICDrivers in Windows
- Installing DynamicAccess Software in Windows
- Overview
- Installing the DynamicAccess LAN Agent for a Client NIC
- Installing DynamicAccess Software for a Server NIC
- Configuring Groups and VLANs for a Server NIC
- Planning the Configuration
- Working With Server Features
- Creating a Group
- Adding NICs to a Group
- Specifying a Dedicated IP Address
- Changing an IP Address
- Creating a VLAN
- Specifying Traffic Priorities
- Saving the Configuration
- Disabling Load Balancing for a Group
- Changing the Primary NIC
- Removing a NIC from a Group
- Deleting or Editing a VLAN
- Displaying NIC Properties
- Displaying Group Properties
- Specifying Failover from Gigabit to 10/100 PCI
- Troubleshooting a Load Balancing Configuration
- Changing Windows2000 Property Settings
- Identifying Windows 2000 Miniport and LAN Connections
- Using Windows2000 Offload Features
- Installing DynamicAccess LAN Encryption Software
- Installing NetWare Client and ServerDrivers
- Overview
- Installing and Configuring the NetWare Server Driver
- Using the Latest Support Packs
- Obtaining NetWare Loadable Modules
- Server Software Installation Requirements
- Installing the NetWare 3.12 Server Driver
- Installing the Server Driver for NetWare 4.11 and 5.0 UsingINETCFG
- Installing the Server Driver and DynamicAccess Technology Using AUTOEXEC.NCF
- Installing Multiple Server NICs
- Verifying the PCI Slot Number
- Installing Server Features
- Configuring Groups
- Verifying the Installation and Configuration
- Changing NetWare Driver Configuration Parameters
- Maintaining Groups
- Configuring the NIC
- Configuring IP Security
- Troubleshooting the NIC
- Running NIC Diagnostics
- Obtaining Drivers
- Specifications and CablingRequirements
- Installing the 3ComDMIAgent
- EtherCD Content and Navigation
- Installing a 3Com NIC While Installing the NOS
- Technical Support
- Index
- FCC Class B Statement
- FCC Declaration of Conformity
- Industry Canada Class B Emission ComplianceStatement
- Avis de Conformité à la Réglementation d’IndustrieCanada
- VCCI Class B Statement
- 3Com End User Software License Agreement
- Product Registration
90 CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS
You can obtain the latest support packs from the Novell
World Wide Web site:
http://www.support.novell.com
Obtaining NetWare Loadable Modules
You can obtain current NLMs for the NetWare servers listed
in the table below from the from the \NWSERVER directory
on the EtherCD, or from the Novell World Wide Web site:
http://www.support.novell.com
4.11 Support Pack 6 or later for all types of
operation.
Support Pack 7 or higher is required for
proper operation of the failover mechanism
for the 3CR990 server NIC.
5.0 Support Pack 2 or later
NetWare Version Required Support Pack (continued)
The required support pack must be loaded before you
install the driver for the 3CR990 NIC.
NetWare Server NLM Name
NetWare 3.12 ETHERTSM.NLM
MSM31X.NLM
NBI31X.NLM
NetWare 4.11, 5.0 ETHERTSM.NLM
TCPIP.NLM
NBI.NLM
MSM.NLM
To upgrade the NetWare driver for a NetWare server, you
must create installation diskettes from the EtherCD that
accompanied this product. Use these diskettes to install
the Netware server driver. See Creating Installation
Diskettes on page 30.