- 3com Network Interface Card User Guide
Table Of Contents
- About This Guide
- Introduction
- Overview
- 3CR990 NIC Features
- DynamicAccess LAN Agent
- Windows2000 Offload Features
- Installing and Connectingthe NIC
- Installing NICDrivers in Windows
- Installing DynamicAccess Software in Windows
- Overview
- Installing the DynamicAccess LAN Agent for a Client NIC
- Installing DynamicAccess Software for a Server NIC
- Configuring Groups and VLANs for a Server NIC
- Planning the Configuration
- Working With Server Features
- Creating a Group
- Adding NICs to a Group
- Specifying a Dedicated IP Address
- Changing an IP Address
- Creating a VLAN
- Specifying Traffic Priorities
- Saving the Configuration
- Disabling Load Balancing for a Group
- Changing the Primary NIC
- Removing a NIC from a Group
- Deleting or Editing a VLAN
- Displaying NIC Properties
- Displaying Group Properties
- Specifying Failover from Gigabit to 10/100 PCI
- Troubleshooting a Load Balancing Configuration
- Changing Windows2000 Property Settings
- Identifying Windows 2000 Miniport and LAN Connections
- Using Windows2000 Offload Features
- Installing DynamicAccess LAN Encryption Software
- Installing NetWare Client and ServerDrivers
- Overview
- Installing and Configuring the NetWare Server Driver
- Using the Latest Support Packs
- Obtaining NetWare Loadable Modules
- Server Software Installation Requirements
- Installing the NetWare 3.12 Server Driver
- Installing the Server Driver for NetWare 4.11 and 5.0 UsingINETCFG
- Installing the Server Driver and DynamicAccess Technology Using AUTOEXEC.NCF
- Installing Multiple Server NICs
- Verifying the PCI Slot Number
- Installing Server Features
- Configuring Groups
- Verifying the Installation and Configuration
- Changing NetWare Driver Configuration Parameters
- Maintaining Groups
- Configuring the NIC
- Configuring IP Security
- Troubleshooting the NIC
- Running NIC Diagnostics
- Obtaining Drivers
- Specifications and CablingRequirements
- Installing the 3ComDMIAgent
- EtherCD Content and Navigation
- Installing a 3Com NIC While Installing the NOS
- Technical Support
- Index
- FCC Class B Statement
- FCC Declaration of Conformity
- Industry Canada Class B Emission ComplianceStatement
- Avis de Conformité à la Réglementation d’IndustrieCanada
- VCCI Class B Statement
- 3Com End User Software License Agreement
- Product Registration
94 CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS
4 Press Enter.
The Internetworking Configuration screen appears.
5 In the displayed menu, select Boards, and then
press Enter.
6 Press Insert.
A list of currently installed drivers appears.
7 Press Insert again.
The New Driver dialog box appears.
8 Specify the directory:
a:\nwserver\3c99x.lan
9 Press Enter.
An updated list of installed drivers appears.
10 Select 3C99x, and then press Enter.
You are prompted to name the NIC, for example: 3c99x_1.
11 Type the name of the NIC and press Enter.
You are prompted for the slot number. For information on
how to verify the slot number, see Verifying the PCI Slot
Number on page 99.
12 Enter the slot number, and then press Enter.
13 Press Esc, Enter (to save), and then Esc.
The Internetworking Configuration screen appears.
14 Select Bindings, and then press Enter.
The configured protocols for installed NICs appears.
(This list will be empty if no protocols are currently
bound to the NIC.)
15 Press Insert.
The Select From the List of Configured Protocols screen
appears.
For NetWare 5.0:
■ The default To a Network Interface is selected.
Press Enter.
The Select a Configured Network Interface
screen appears.