Datasheet

ManualsBrands3com ManualsNetworking3CRWE776075-ME

Secure, reliable,

108Mbps, PoE, wireless

connectivity for small

and medium business.

This innovative access

point provides

advanced security

features including

WPA2, AES and support

for multiple SSID's,

VLANs and Rogue AP

detection making it a

true enterprise-class

solution.

ATA SHEET

OVERVIEW

The 3Com

Wireless 7760 11a/b/g PoE Access Point is a cost effective

dual band, Power over Ethernet (PoE) wireless solution for small and

edium enterprises. Configurable, this access point can operate at

802.11a or can be used as a 802.11b/g access point. With the latest

advanced security features such as Wi-Fi Protected Access (WPA/

WPA2), Wired Equivalent Privacy (WEP) and Open system this access

point provides ultra-fast speeds of up to 108Mbps in turbo mode, and

offers superior long-range connectivity with eXtended range (XR) tech-

nology. This new access point also provides multiple SSID's support and

VPN passthrough along with VLAN support.

KEY BENEFITS

ENABLING WIRELESS FREEDOM

Take advantage of the freedom of high-speed networking without wires

with the Wi-Fi CERTIFIED 3Com Wireless 7760 11a/b/g PoE Access

Point. WLANs are an attractive solution for cost-effectively and securely

extending mobile access to wired network resources or creating full-

featured networks in small and medium businesses, remote sites, or

temporary locations. Each access point (AP) supports up to 64 wireless

users, so there is plenty of room for growth.

PROVIDES POE DEPLOYMENT FLEXIBILITY

PoE support makes it easier than ever to overcome installation problems

by eliminating the need for an AC power plug at each AP. The 3Com

Baseline Switch 2226-PWR Plus or other 802.3af-compliant PoE products

supply both power and data to the access points through Category 5 or

6 Ethernet cable, giving you flexible installation options in hard to wire

or reach locations.

3Com

Wireless 7760 11a/b/g PoE Access Point

Summary of content (8 pages)

PAGE 1
3Com® Wireless 7760 11a/b/g PoE Access Point DATA SHEET OVERVIEW Secure, reliable, 108Mbps, PoE, wireless The 3Com Wireless 7760 11a/b/g PoE Access Point is a cost effective dual band, Power over Ethernet (PoE) wireless solution for small and connectivity for small medium enterprises. Configurable, this access point can operate at and medium business. 802.11a or can be used as a 802.11b/g access point.
PAGE 2
3COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT KEY BENEFITS (CONTINUED) SECURES AND PROTECTS WIRELESS COMMUNICATIONS 3Com delivers enterprise-class security features to small and medium businesses. To shield wireless communications at the source, WPA2 with TKIP/AES encryption provide the latest, toughest standards-based security; WEP encryption supports legacy 802.11b wireless clients. For additional protection, the access point supports 802.
PAGE 3
COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT FEATURES AND BENEFITS (CONTINUED) INSTALLATION AND MANAGEMENT CONVENIENCE WDS bridge and repeater configuration Multiple APs can function as bridges supporting point-to-point or multipoint modes; repeater mode extends wireless coverage. PoE support Expands installation options by eliminating the need for power adapters and AC outlets for APs.
PAGE 4
3COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT Multiple SSID Support Multiple SSID support enables many flexible configurations, including supporting multiple client security schemes simultaneously. You no longer need to dumb down your wireless network to support a few legacy WEP devices.
PAGE 5
3COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT Point-to-Point WDS Link With the 3Com Wireless 7760 11a/b/g PoE Access Point, you can connect wired LANs with a wireless WDS link. The APs act as wireless bridges, forwarding traffic between LANs.
PAGE 6
3COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT Repeater Repeater Mode The 3Com Wireless 7760 11a/b/g PoE Access Point can also extend the range of WLANs by acting as a wireless repeater, forwarding traffic between associated wireless workstations and another AP connected to the wired LAN.
PAGE 7
3COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT SPECIFICATIONS MINIMUM SYSTEM REQUIREMENTS Computer with an Ethernet 10BASE-T, 10/100, or 10/100/1000 interface configured for Internet communication Operating system that supports an Ethernet connection with an IP stack (Installation CD Discovery Application requires Windows XP, or Windows 2000) PCs and laptops require 802.11a or 802.11b/g adapter cards for wireless access MEDIA INTERFACES RJ-45, IEEE 802.11a, 802.11b, 802.
PAGE 8
3COM ® WIRELESS 7760 11A/B/G POE ACCESS POINT SPECIFICATIONS (CONTINUED) DIMENSIONS AND WEIGHT Height: 26.7 cm (10.5 in) Width: 8.3 cm (3.25 in) Depth: 3.2 cm (1.25 in) Weight: 200 g (7.