User Manual

Installing the Novell NetWare Client Driver 3-5
23 Continue disk swapping as requested.
A message screen now appears, indicating that the
installation is complete.
24 Select Configuration from the file bar and click
This workstation.
25 Enter the default NET.CFG location of C:\NET.CFG
and click Edit.
26 Type the following in the Current NET.CFG File
Contents dialog box:
link driver 3C515
frame ethernet_802.2
node address
The word “link” must start in column 1, and “frame”
must be indented using the [Space Bar]. Specify the same
frame type as that on the NetWare server that you will
log in to; otherwise, login will be unsuccessful.
27 Click Save to finish.
The NetWare client driver for OS/2 is now installed.
28 Select Close from the menu in the top-left corner
of the window to exit the installation program.
29 Shut down OS/2 Warp, remove the EtherDisk
diskette, and reboot the PC to complete installation.
Installation of the NetWare driver is complete.
Windows for Workgroups
This section describes how to install the NetWare driver if
your PC runs Windows for Workgroups (WFW) and you
are using the Microsoft Windows Network in combination
with Novell NetWare. If you want to install NetWare shell
support only, go to the next section. For more information,
ask your MIS representative.
1 Install the 3C515-TX NIC and connect it to the
network as described in Chapter 2.