User Guide

3Com Router 5000 and Router 6000 Family Release Notes v2.41 • Page 23

Parameter Description

file name File name of the router software

inet on Ethernet (e) IP address of interface eth0.

host inet (h) IP address of TFTP/FTP Server

gateway inet (g) IP address of the gateway

user (u) FTP user name

ftp password (pw) password used for ftp session

flags (f)

0x80 – TFTP

0x0 -- FTP

target name (tn) Target file name to be used on the router

4 When the Net Port Download Menu is re-displayed, select option 2 (Download from Net to

Flash) to download and write the application image to Flash memory. Depending on the

running code, the system display would look something like:

Net Port Download Menu:

1: Change Net Parameter

2: Download From Net To Flash

3: Download From Net To SDRAM And Run

4: Upload the current config file to PC

5: Exit to Main Menu

Enter your choice(1-5): 2

boot device : fei

unit number : 0

processor number : 0

host name : 8040

file name : r5000.bin

inet on ethernet (e) : 10.1.1.110

host inet (h) : 10.1.1.241

gateway inet (g) : 10.1.1.254

flags (f) : 0x80

Attached TCP/IP interface to fei0.

Attaching network interface lo0... done.

NET download completed...

read len = [12632583]

Please select file to be saved as

1. Main application file

2. Backup application file

3. Secure application file

4. Cancel downloading

Enter your choice(1-4): 1

Creating the file: flash:/r5000.bin

Write data to flash...

Please wait, it may take a long time!

#####################################################################