50.7cs,60.7cs,65.7cs,680.
INSTALLATION INSTALLATION WARNINGS AND TIPS THANK YOU for purchasing Infinity’s Kappa® Series automotive loudspeaker components. We’ve organized this manual to make their installation as simple and trouble-free as possible. Please read it thoroughly before proceeding. REAR DECK PRECAUTION In some cars, fuel tanks may be located directly beneath the rear deck.
INSTALLATION INTERMOUNT III MOUNTING RINGS The Kappa 60.7cs is packaged with two different speaker adaptor rings. The rings will allow the speakers to be installed into various factory 6," 6-1/2" and 6-3/4" openings. The metal ring can be mounted in many European vehicles, Japanese vehicles or vehicles with 6" speaker locations. The plastic ring can be mounted in many vehicles using 6-3/4" speaker locations or three-point mounting frames. FLUSH-MOUNT Figure 5A.
SPECIFICATIONS INSTALLATION MOUNTING THE CROSSOVER Open the crossover housing by placing your fingers between the terminals and the top cover, and gently pulling off the cover. Using screws or a wire tie, mount the crossover through the holes provided. TWEETER LEVEL ADJUSTMENT Located on the right side of the crossover network is a small switch which controls the tweeter level. The upper position is +3dB and the lower position is 0dB. Adjust to personal preference.