User manual

78 C
HAPTER
7: S
UPPLEMENTARY
V
OICE
C
ALL
S
ERVICES
Call Waiting
Call Waiting allows you to place an active call on hold in order to answer another
incoming call on the same telephone number. By default, Call Waiting is enabled
on port 1 and disabled on port 2.
Telephone companies typically provide Call Waiting support on telephone number
1 only. For Call Waiting support on telephone number 2, you will have to have this
capability added to your ISDN line. For more information refer to Appendix E.
How to Configure Call
Waiting
To change the default setting, do the following.
1
Go to the ISDN LAN Modem’s main configuration page
(
http://3com.oc.lanmodem/
).
2
Click
ISDN Parameters
.
3
Locate
Call Waiting Enable
, and then clear the check box for the port(s) for which
you want Call Waiting disabled, or check the box for the port(s) for which you
want Call Waiting enabled.
You should disable Call Waiting on a port(s) to which a fax machine is connected
so that any fax calls are not interrupted.
4
Click
Submit
.