User Guide

Examples 309
3 Select Monitoring > Stop Monitoring. 3Com Network Director will stop
monitoring all of the devices and links in your network.
Configuring
Monitoring for a
Remote Office
You have turned off automatic monitoring mode, and are configuring
monitoring in order to reduce the monitoring traffic passing over your
WAN links.You decide that you wish to fully monitor the devices on a
subnet at a particular remote office, but only wish to poll core devices
every 5 minutes, and non-core devices every 10 minutes.
1 Select the subnet at the particular remote office in the main window tree
or map:
Figure 147 Subnet Selection from Main Window Tree
2 Launch the Properties dialog box for the subnet from Device > Properties,
or by right-clicking on the subnet and selecting Properties from the
right-click menu, and then select the Monitoring tab.