User Guide

466 CHAPTER 11: CREATING REPORTS
Table 81 Available Columns for ‘Link Details
When generating a link details custom report you may see multiple
entries in a table cell for a link, for example two entries for Resilience. The
link in question is an aggregated link and is listing the properties of each
link that composes the aggregated link.
Column Description
Comment
(Both ends)
The comment associated with the devices at either end of the link.
Device Name
(Both Ends)
Gives the names of the devices at either end of link.
Duplex mode The duplex mode of the link.
IP Address
(Both Ends)
Gives the IP addresses of the devices at either end of link.
Link
Aggregation
Whether link aggregation is enabled or disabled for the link.
Media Type The media type of the link for example, Ethernet.
Port (Both
ends)
Gives port number that either end of link is connected to.
Registered
(Both Ends)
Whether or not the devices at either end have been registered for
Device Warranty using the Device Warranty Wizard.
Resilience
Mode
Whether resilience is enabled for the link.
Spanning Tree
Mode
The spanning tree mode of the link for example, Blocked.
Speed The speed of link e.g. 10 Mbps.
Unit (Both
Ends)
Gives the unit numbers of the devices that either end of link is
connected to.