User Guide

870 Appendix E: REPORT EXAMPLES
For example, the configuration below would be reported as a
misconfiguration:
The same VLAN (ID=2) is configured on three switches with three
different names. 3Com Network Director will choose one of the
configured names to represent the VLAN. This name will be used to
display the VLAN in the Show VLANs toolbar and the Find dialog.
To avoid this misconfiguration being reported in the future, configure the
same VLAN name on all switches.
Spanning Tree Fast
Start
Spanning Tree Fast Start allows you to specify whether a switch port goes
directly to the STP Forwarding state when a device is connected to it. This
field should be set to enable if the switch port is connected to a single
end station, and disable if the switch port is connected to another switch.