P H A S E R® 8 6 0 COLOR PRINTER Advanc ed Features a n d Tr o u b l e s h o o t i n g G u i d e
Phaser® 860 Color Printer Advanced Features and Troubleshooting Manual June 2001
Copyright © Xerox Corporation. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Phaser®, PhaserShare®, ColorStix® II, the TekColor® icon, Made For Each Other®, DocuPrint®, WorkSet®, Ethernet®, the stylized X, and XEROX® are registered trademarks of Xerox Corporation.
Contents Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Print quality modes .......................................................... 2 TekColor™ color corrections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Secure prints, proof prints, and saved prints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Separation pages . . . . . . . . . . . .
Printer Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 CentreWare IS Printer Management software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Usage Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Email notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Features Advanced Features Your Phaser 860 Color Printer comes with many useful features to help you create the best possible printed documents. You can access the printer features in the printer driver, which you use when you send a print job to the printer. To ensure that you have access to all of the printer features, make sure you have installed the printer driver that comes on your Phaser 860 Printer CD-ROM. Updated printer drivers are also available on the Xerox web site: www.xerox.
Advanced Features Print quality modes You can choose between different print quality modes to obtain the best combination of speed and print quality for your job.
Advanced Features TekColor™ color corrections You can select a color correction to match particular press specifications or simulate your computer screen’s colors. Otherwise, select Automatic to let the printer automatically pick the best color correction for elements in your document.
Advanced Features Secure prints, proof prints, and saved prints You can choose one of the following special job types: ■ Secure Print: Print a confidential document; the password-protected job is stored on the printer’s hard disk drive. The job prints only after you enter the password on the printer's front panel. ■ Proof Print: Print only one copy of the job so you can proof the copy. If you want to print the remaining copies, select the job name on the printer's front panel.
Advanced Features To print a saved print job or the remaining copies of a proof print job, select the job name on the printer's front panel: 1. With Menus highlighted, press the Scroll Down key to scroll to Printable Pages. 2. Press the OK key. 3. If necessary, scroll to Proof Print Jobs or Saved Print Jobs. 4. Press the OK key. 5. Scroll until you find your job name. 6. Press the OK key. 7. If necessary, scroll to Print. 8. Press the OK key. 9. Scroll to the desired number of copies. 10.
Advanced Features To delete a saved print job or the remaining copies of a proof print job, select the job name on the printer's front panel: 1. With Menus highlighted, press the OK key. 2. Press the Scroll Down key to scroll to the Printable Pages Menu. 3. Press the OK key. 4. If necessary, scroll to Proof Print Jobs or Saved Print Jobs. 5. Press the OK key. 6. Scroll until you find your job name. 7. Press the OK key. 8. Scroll to Delete. 9. Press the OK key to delete the job.
Advanced Features Note Many applications have a collate option when you select Print in the application. Collation done at the printer is faster than collation performed by an application. For faster printing of a collated job, select collation in the printer driver (as described below) and do not select collation in the application. You can specify collation in a supported driver: ■ Windows 95 / Windows 98 PostScript driver: On the Output Options tab, check the Collate checkbox.
Advanced Features Booklet printing You can print a document in the form of a small book. The printer automatically reduces each page image by 50 percent and prints two pages per sheet of paper. The pages are printed in the correct order so that you can fold and staple the pages to create a booklet. 0726-67 Note To use this feature, the printer must have the DP Feature Set. You can create booklets for any paper size that is supported for 2-sided (duplex) printing.
Advanced Features Negative and mirror images You can print your pages as a negative image (reverses the light and dark areas in your printed image) and/or mirror image (flips images horizontally on pages when printed). You can select negative or mirror images in a supported driver: ■ Windows 95 / Windows 98 PostScript driver: On the Setup tab, click the More Layout Options button, then click the Print as a Negative Image and/or Print as a Mirror Image checkbox in the More Layout Options dialog box.
Advanced Features Watermarks A watermark is text (independent of that provided by the printing application) that is printed on the first page or every page of the document. You can create a watermark or edit an existing watermark’s text, color, location, and angle. You can also choose to print the watermark only on the first page, print the watermark in the background, or print the text of the watermark as an outline (instead of filled text). Note Not all applications support watermark printing.
Color and Color Sampler Charts Color and Color Sampler Charts You can have the colors on your print match particular press specifications or match your computer screen’s colors. To do this, pick a color correction in the printer driver; see page 3 for more information. You can use color sampler charts to help select the colors to use in your application. Refer to the next section for more information. For information on PANTONE Colors, refer to page 15.
Color and Color Sampler Charts Each color sampler chart is several pages long. Either: ■ Print them in panels and connect them to form a wall chart ■ Print them and place them in a binder for easy reference Note For information on printing the PANTONE Color sampler chart, refer to page 16.
Color and Color Sampler Charts 8. Press the OK key to select that print quality mode. 9. Press the Back key to return to the Job Defaults Menu again. 10. Scroll to Set TekColor Correction. 11. Press the OK key. 12. Scroll to the color correction you want. 13. Press the OK key to select that color correction. To print the color sampler chart, on the printer's front panel: 1. With Menus highlighted, press the OK key. 2. Press the Scroll Down key to scroll to the Printable Pages Menu. 3.
Color and Color Sampler Charts Printing the color sampler charts with utility files From a Macintosh 1. To print the color sampler charts with utility files, use the Apple Printer Utility. For information about installing the Apple Printer Utility, refer to page 36. 2. Download the desired color sampler utility file to the printer. Refer to page 38 for the steps to download utility files using the Apple Printer Utility. From a PC or workstation 1.
Color and Color Sampler Charts PANTONE Colors PANTONE Color files for your printer include printer-specific color library files for some specific applications and a file to print the PANTONE Color sampler chart. For the latest information on color libraries, contact your local Xerox reseller or visit the Xerox web site at: www.xerox.com/officeprinting Printing PANTONE Colors from the color selection book In some applications, you can select colors from the PANTONE Process Imaging Guide.
Color and Color Sampler Charts Installing the PANTONE Color files To install the files from the web: 1. Start your web browser (such as Netscape Navigator or Internet Explorer). 2. Enter the following web address: www.xerox.com/officeprinting/ 3. Choose the Phaser 860 printer from the drop-down list. 4. From the pull-down lists, select your computer platform and PANTONE for type of file. 5. Click the Go button to search the web site and display the list of files to download. 6.
Color and Color Sampler Charts Printing the PANTONE Color Chart from a PC To print individual pages from the PANTONE Color chart, use Acrobat Reader: 1. To install Acrobat Reader, insert the printer’s CD-ROM in your computer’s drive, go to the Utilities folder, and follow the on-screen instructions to install Acrobat Reader onto your computer’s hard disk. 2. Locate the Pantone files you downloaded from the web site and double-click the desired PDF file. 3. View and print pages from the PDF file.
PhaserPrint Plug-in for Photoshop PhaserPrint Plug-in for Photoshop The PhaserPrint™ plug-in, included on the printer’s CD-ROM, operates within the Photoshop application on Macintosh computers. With PhaserPrint, you can improve image transfer time and gain easy access to Phaser printer features and other media features. Note PhaserPrint software produces correct output only on supported Phaser printers.
PhaserPrint Plug-in for Photoshop 3. From Photoshop’s Mode menu, select one of the following image modes supported by PhaserPrint: ■ Grayscale ■ Indexed Color ■ RGB Color ■ CMYK Color ■ Lab Color 4. From the File menu, select Export and then select PhaserPrint. 5. In the PhaserPrint dialog box, select your printer in the Printer Model field. 6. Make other selections in the PhaserPrint dialog box.
Fonts Fonts Your Phaser 860 Color Printer uses the following types of fonts: ■ Resident fonts ■ Fonts downloaded onto the hard drive ■ Fonts downloaded into memory ■ Fonts downloaded with your print job from the application ATM (Adobe Type Manager) software helps your computer display these fonts on screen as they will appear in your prints. If you don’t already have ATM on your computer, install it from the printer’s CD-ROM. Also install the printer’s screen fonts from the ATM folder.
Fonts Carta Chicago ChicagoCE Clarendon Clarendon-Bold Clarendon-Light ClarendonCE ClarendonCE-Bold ClarendonCE-Light CooperBlack CooperBlack-Italic Copperplate-ThirtyThreeBC Copperplate-ThirtyTwoBC Coronet-Regular CoronetCE-Regular Courier Courier-Bold Courier-BoldOblique Courier-Oblique CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique Eurostile Eurostile-Bold Eurostile-BoldExtendedTwo Eurostile-ExtendedTwo EurostileCE EurostileCE-Bold EurostileCE-BoldExtendedTwo EurostileCE-Exten
Fonts LubalinGraph-Book LubalinGraph-BookOblique LubalinGraph-Demi LubalinGraph-DemiOblique LubalinGraphCE-Book LubalinGraphCE-BookOblique LubalinGraphCE-Demi LubalinGraphCE-DemiOblique Marigold MonaLisa-Recut Monaco MonacoCE NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbk-Italic NewCenturySchlbk-Roman NewCenturySchlbkCE-Bold NewCenturySchlbkCE-BoldItalic NewCenturySchlbkCE-Italic NewCenturySchlbkCE-Roman NewYork NewYorkCE NotDefFont Optima Optima-Bold Optima-BoldItalic Optima-It
Fonts Resident typefaces (PCL5C) For PCL5C (Printer Command Language) printing, the printer supports Courier, Times, and Universe typefaces in medium, bold, italic medium, and italic bold. In addition, there are 46 PCL fonts. The printer port must be set to AutoSelect (which is the default) for the printer to accept PCL data.
Fonts Before printing, make sure that the fonts specified in your document are installed in the printer or are set up correctly. If you request a font in an application that is not resident in the printer, is not correctly installed, or is not downloaded from the application in the print job, the text is printed in Courier typeface.
Fonts 8. For Destination, select the download location: either the printer’s memory or the hard disk. 9. To download the fonts in the list, click the Send button. Note To remove downloaded fonts from the printer, follow steps 2 through 5, highlight the font in the list under Fonts (in the printer’s dialog box), and then click the Remove button. Downloading fonts from a PC Use the Xerox CentreWare Font Download Utility to download fonts to the printer. For detailed information, refer to the online help.
Fonts 3. 4. In the Printer Selector dialog box: a. Under AppleTalk Zones, select your printer’s zone. b. Under Printers, select your Phaser 860 printer. c. Click the Open Printer button. From the File menu, select Print Font Samples. Listing the fonts from a PC Use the Xerox CentreWare Font Download Utility to list the fonts available on the printer. For detailed information, refer to the online help. 1.
Printer Management Printer Management You can configure and manage your printer: ■ On the front panel ■ Using CentreWare IS Printer Management software ■ Through Usage Profile Reports, which can be emailed when the printer needs attention (such as needing more paper) This section covers the following features related to the operation of your printer: ■ The printer’s Startup Page — see page 30 ■ Protected mode for the front panel menus — see page 31 ■ Sys/Start Job execution — see page 32 ■ Man
Printer Management Usage Profile A Usage Profile provides a proactive strategy for service, maintenance, and administration of your printer. With a Usage Profile, you can keep track of most printer parameters in detail. The Usage Profile helps you predict the ordering needs of customer- replaceable consumables for remote locations.
Printer Management 3. 4. Specify the text and message text for the email: a. On the MaiLinX Alerts page, click the MaiLinX Message Settings link. b. For each recipient, specify the subject text and message text for the emails or choose default to have the recipient receive the default text. c. Click the Save Changes button on the bottom of the page. Specify the conditions under which an email will be sent to each of the three recipients: a.
Printer Management Operational features The printer’s Startup Page By default, the printer produces a Startup Page each time the printer is turned on or reset. If desired, you can disable the Startup Page. There are three methods for turning on/turning off the Startup Page: ■ From the printer’s front panel ■ Using CentreWare IS Printer Management software ■ Using utility files To turn on/turn off the Startup Page from the printer’s front panel: 1. With Menus highlighted, press the OK key. 2.
Printer Management Protected mode for the front panel menus You can have the printer enter "protected mode" to prevent users from changing front panel settings that may impact the prints of other users. Instead, users select printing features, such as color corrections, through the printer drivers only. In protected mode, users can access all menus except the Printer Setup Menu and the Network Setup Menu. Note You can temporarily override protected mode.
Printer Management SysStart Job execution You may load a startup file (SysStart) onto the printer’s internal hard disk, if installed. The SysStart file is similar to an init file — when you turn on or reset the printer, the file executes.
Printer Management ■ PC: ■ SYSTART.PS — Turns on automatic execution of the SysStart job ■ NOSYSTRT.PS — Turns off automatic execution of the SysStart job Refer to page 40 for downloading instructions. To make the change take affect, reset the printer. Manual feed timeout When you select Manual Feed-Paper or Manual Feed-Transparency in the printer driver, the front panel prompts you to add the sheet of paper or transparency.
Printer Management 7. Press the OK key. Front panel contrast To make the front panel text more readable, you can adjust the contrast between the text and the background: 1. On the front panel, with Menus highlighted, press the OK key. 2. Scroll to Printer Setup Menu by pressing the Scroll Up or Scroll Down key. 3. Press the OK key. 4. Scroll to Set Front Panel Contrast. 5. Press the OK key. 6. Scroll the value until you achieve the desired contrast between the text and the background.
Printer Management Front panel language To change the language used for the text on the front panel: 1. On the front panel, with Menus highlighted, press the OK key. 2. Scroll to Printer Setup Menu by pressing the Scroll Up or Scroll Down key. 3. Press the OK key. 4. Scroll to Set Front Panel Language. 5. Press the OK key. 6. Scroll the desired language. 7. Press the OK key.
Printer Utilities Printer Utilities In addition to using the printer’s front panel or the options in a supported driver, the printer’s utility files offer another method for changing the way the printer operates. Some utility files control print features, such as the default color correction. However, printer features that are selected from a printer driver override utility file settings as well as front panel settings.
Printer Utilities Utility files on the Xerox web site On the Xerox Color Printer web site, you can explore options such as customer support, documents, and new product information. New and updated information is always being added, so check the web site frequently. Access the Xerox Color Printer web site by entering the following address in a web browser: www.xerox.com/officeprinting/ To locate the utility files: 1. Start your web browser (such as Netscape Navigator or Internet Explorer). 2.
Printer Utilities Downloading utility files from a Macintosh Use the Apple Printer Utility to download files from your Macintosh to the printer. To download PostScript utility files to the printer: 1. From the PhaserTools folder on your computer’s hard disk, double-click the Apple Printer Utility. 2. In the Printer Selector dialog box: a. Under AppleTalk Zones, select your printer’s zone. b. Under Printers, select your Phaser 860 printer. c. Click the Open Printer button. 3.
Printer Utilities Using the Apple Printer Utility to perform other tasks In addition to downloading PostScript files and fonts, you can use the Apple Printer Utility to perform the following specialized tasks: ■ Turning on/off the Startup Page ■ Changing the printer’s AppleTalk name Note If your printer is connected through a print server, you can only use the Apple Printer Utility to download PostScript utility files. To turn on/off the Startup Page: 1. Double-click the Apple Printer Utility. 2.
Printer Utilities Downloading utility files from a PC Downloading files from Windows 95/Windows 98/Windows Me 1. Select the utility file you want to send to the printer, for example RESET.PS. 2. In the taskbar on your screen, click Start, then Programs, then MS-DOS Prompt. 3. Change the directory to the location of the utility files. 4. If your printer is connected to the parallel (LPT) port, type the following command (where x is 1, 2, or 3): COPY RESET.
Printer Utilities ■ For NetWare 3.xx and Netware 4.xx bindery queues: capture q=[queue_name] l=[port] nb nff nt where queue_name is the name of the queue to be captured, and port is the virtual port to capture to, such as LPT3. Also, nb is no banners, nff is no form feeds, and nt is no tabs. For example: capture q=phaser_860 l=3 nb nff nt Note For NetWare 4.xx NDS queues, the queue name needs to start with a period. For example: capture q=.phaser_860_q.nds.printers.
Printer Utilities ■ IPX and Appletalk ports require the redefinition of the LPTX port to the network path through the use of the NET USE command. NET USE LPT1 \\Server_Name\Queue_Name For example: NET USE LPT1 \\NW_SERVER\Phaser or: NET USE LPT2 \\NT_SERVER_NT\Phaser After redirecting the port using the NET USE command you can use the COPY command to print the postscript file. For example: C:\> COPY TEST.
Troubleshooting Phaser 860 Printers Troubleshooting Phaser 860 Printers Getting Help Refer to the following resources for information about your printer: ■ Printer CD-ROM ■ Advanced Network Management Tools CD-ROM ■ Printer’s front panel and internal pages ■ Windows driver and driver help system ■ Xerox web sites ■ CentreWare IS ■ Other online services Printer CD-ROM The printer’s auto-running CD-ROM guides you to the various resources available for installing and learning more about your Pha
Troubleshooting Phaser 860 Printers Printer’s front panel and internal pages You can press the Information key at any time to get additional information about the message displayed on the front panel. On the printer’s front panel, use the Printable Pages menu or the Support Menu to print internal pages that give information about the printer configuration, supplies information, paper tips, etc.
Troubleshooting Phaser 860 Printers www.colorconnection.xerox.com/ This site helps you get the most from your color printer: ■ Interactive tutorials, color printing templates, and helpful tips for using your printer and favorite software applications. ■ Easy access to online technical support. ■ Customized features to meet your individual needs. CentreWare IS For information on CentreWare IS, refer to page 27. Other online services Subscribe to email update notices: www.colorconnection.xerox.
Troubleshooting Phaser 860 Printers Indicator light problems Status indicator light is off The printer is turned off, is not ready, is disabled, or has detected an error. ■ Make sure that the printer is plugged in and turned on. ■ Do not plug the printer’s power cord into a power strip; use a wall outlet. Status indicator light is blinking green ■ If the printer is receiving, processing, or printing a job, wait for the job to be completed or cancel the job.
Troubleshooting Phaser 860 Printers Front panel error messages When in a menu, the front panel returns to Ready to Print ■ The front panel menu times out and returns to Ready to Print if no activity occurs in the menu system in 2 minutes. ■ If you want to re-enter the menu system, highlight Menus and press the OK key. Output tray full ■ Too much media is stacked in the output tray. Remove all printed pages from the output tray. Ink low - Add ink ■ One or more ink-loading bin is almost empty.
Troubleshooting Phaser 860 Printers Maintenance drawer (A) missing ■ If the maintenance drawer is not installed, open the front cover and install the maintenance drawer (labeled A). ■ If the maintenance drawer is already there, pull out the drawer, make sure that the counter (orange piece labeled C2) is installed, and re-insert the maintenance drawer. Maintenance kit low ■ The Maintenance Kit is almost empty. ■ Order a replacement Maintenance Kit since the Maintenance Kit will need replacing soon.
Troubleshooting Phaser 860 Printers Paper jam message ■ Clear the jam. For detailed information about clearing jams, refer to the Phaser 860 Color Printer User Guide. ■ Make sure that paper or transparencies are installed correctly in the tray and that the tray switch is set correctly. ■ If the jam occurred because too much media was loaded in the tray, reduce the amount of media so it is below the fill line on the left side of the tray.
Troubleshooting Phaser 860 Printers Problems with automatic two-sided printing Output is single-sided ■ Make sure that you have selected two-sided printing in the printer driver. ■ Use Letter-size, A4-size, or Legal-size paper only for two-sided printing. ■ If using the standard paper/transparency tray, make sure the tray switch is set to Paper. Frequent jams with two-sided printing ■ Paper must be between 60 - 120 g/m2 (16 - 32 lb. bond) in weight.
Troubleshooting Phaser 860 Printers Problems printing on labels Labels are printed on the wrong side ■ Make sure the labels are loaded face up in a tray, or face down in the manual-feed slot. ■ Make sure that two-sided printing is not selected in the printer driver; you cannot print labels on two sides. Printing labels from Microsoft Word 1. From the Tools menu, select Envelopes and Labels. 2. In the Envelopes and Labels dialog box, click the Labels tab. 3.
Troubleshooting Phaser 860 Printers Print quality problems Light-colored or missing stripes on prints ■ Run a test print by choosing Print Diagnostic Pages on the printer’s front panel (by selecting the Support Menu, then selecting Improve Print Quality). ■ If a light stripe appears in one color, clean the printhead by choosing Eliminate Light Stripes on the front panel (by selecting the Support Menu, then selecting Improve Print Quality).
Troubleshooting Phaser 860 Printers Prints have dull, faded colors ■ If you are using the standard paper/transparency tray or the high capacity transparency/label tray, make sure that the tray switch is set for the appropriate media.
Troubleshooting Phaser 860 Printers Print is wrinkled or rippled ■ If your paper is smooth, glossy, or coated, try a different type of paper. Use only supported paper types. ■ Use single-sided printing instead of double-sided printing. Printing problems The printer times out when connected to a parallel port ■ Windows users: To change the timeout for transmission retry, refer to the Microsoft Online Help for instructions.
Troubleshooting Phaser 860 Printers Preventing media jams Use the following guidelines to prevent media jams inside the printer. ■ Make sure the printer is on a flat, level surface. ■ Don't add media above the tray's fill line. ■ Media: ■ ■ Use only the recommended media. Refer to the Phaser 860 Color Printer User Guide or print the Paper Tips Page from the printer’s front panel.
Troubleshooting Phaser 860 Printers 56 Phaser 860 Color Printer
Specifications for the Phaser 860 Color Printer Specifications for the Phaser 860 Color Printer Temperature Operating: 10 degrees C to 32 degrees C (50 degrees F to 90 degrees F) Non-operating: -30 degrees C to +60 degrees C (-22 degrees F to 140 degrees F) Humidity Operating: 10% to 85% relative humidity, non-condensing Non-operating: 10% to 95% relative humidity, non-condensing Altitude Operating: 0 to 2400 m (0 to 7,874 ft.) above sea level Shipping: 0 to 15000 m (0 to 49200 ft.
Specifications for the Phaser 860 Color Printer Dimensions of one High-Capacity Paper Tray Assembly Height: 127 mm (5 in.) Depth: 530 mm (20.875 in.) Width: 440 mm (17.375 in.) Weight of one High-Capacity Paper Tray Assembly 9.1 kg (20 lb.) Sound level Sound Pressure (LpA); Sound Power (LwA) Printing: LpA < 60 dB (A) LwA < 7.2 Bels (A) Idle: LpA < 45 dB (A) LwA < 5.6 Bels (A) Printer tilt 2 cm/.75 in. 0726-94 Printer clearances 10 cm (4 in.) 10 cm (4 in.) 10 cm (4 in.
Regulatory Information for Phaser 860 Printers Regulatory Information for Phaser 860 Printers Canadian EMC (Electromagnetic Compatibility) regulatory standards ■ This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Regulatory Information for Phaser 860 Printers Declaration of conformity Xerox Corporation Office Printing Business P.O. Box 1000 Mail Stop 60-512 Wilsonville, Oregon 97070 U.S.A.
Regulatory Information for Phaser 860 Printers FCC Class B device The equipment described in this manual generates and uses radio frequency energy. If it is not installed and used properly in strict accordance with Xerox’s instructions, it may cause interference with radio and television reception. This equipment has been tested and verified to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Regulatory Information for Phaser 860 Printers 62 Phaser 860 Color Printer
Index Index A Adobe Photoshop plug-in 18 altitude, operating range 57 Automatic color correction 3 automatic tray switching 35 B Black and White color correction 3 C CD-ROM for printer 43 CentreWare IS 45 CentreWare IS Printer Management software 27 cleaning pages changing the media tray source 35 CMYK Sampler Macintosh utility file 14 PC utility file 14 color charts CMYK 12 HSB 12 PANTONE Color 15 printing from a Macintosh 14 printing from a PC 14 printing from the front panel 12 RGB 12 color connectio
Index E enabling and disabling the Startup Page 30 energy saving mode 34 Enhanced print quality mode 2 Euroscale Press color correction 3 F Fast Color print quality mode 2 features of the printer 1 Font Sampler, Macintosh utility file 14, 25 fonts downloading 23 printing a list of resident fonts 25 sampler, printing 25 TrueType 23 FONTS.
Index M Macintosh utility files 38 color samplers 14 Font Sampler 14, 25 Menu Long 31 Menu Short 31 manuals 43 media jams output after clearing 55 preventing 55 Menu Long, Macintosh utility file 31 Menu Short, Macintosh utility file 31 MENULONG.PS, PC utility file 31 MENUSHRT.
Index printer dimensions 57 front panel menus 31 print speed 2 quality modes 2 printer CD-ROM contents 43 printer drivers location 43 uses 44 Q quality modes 2 R regulatory standards 59 resellers 45 RGB Sampler Macintosh utility file 14 PC utility file 14 S setting front panel intensity 33 SNAP Press color correction 3 specifications 57 speed of printing 2 sRGB Display color correction 3 Standard print quality mode 2 standby mode 34 Startup Page enable or disable 30 SWOP Press color correction 3 Sys/Star
Index troubleshooting black and white prints instead of color 53 duplex 50 front panel messages 46, 47 labels are printed on wrong side 50 labels printing on wrong side 51 letterhead paper printing on wrong side 50 paper jams, preventing 55 print quality problems 54 printed colors 52 two-sided printing 50 TrueType fonts 23 two-sided printing troubleshooting 50 U Usage Profile reports brief overview 28 utility files Macintosh, using 38 PC, using 40 V videos 43 Vivid Color color correction 3 voltage ranges
