Installation Instructions

Router 3032 15
System specifications
LEDs
There are eight LEDs on 3032 cover. The following table explains their meaning.
Table 6 System specifications of Router 3032
Item
3032
descrip
tion
Port 1 console port
1 ADSl over ISDN (ADSL Annex B)
Four 10/00M Ethernet ports
Processor MPC859 50 Mhz
SDRAM 64MB
Flash Memory 8MB
Maximum power consumption 12W
Power supply (external) input rated voltage: 100-240V a.c., 50/60Hz
Maximum tolerance: 90-264V a.c., 50/60Hz
Current:0.5A~1A
Output Voltage: 12V d.c.
Current: 4A
Dimensions (WxHxD) 300mm (11.81in) X 1800mm (7.1in) X 45mm
(1.77in) (Maximum dimensions, which are the
highest arc points of the plastic panel.)
Weight 1kg
Operating temperature 0 to 40*C
operating humidity 10 to 90% (noncondensing)
Table 7 LEDs of Router 3032
LED Description
LAN0/LAN1/LAN2/LAN3 OFF means that link is not set up.
ON means that link has been set up. Blinking means that data is being sent from
or received at the interface.
ADSL ACT OFF means that no data is being sent from
or received at the interface.
Blinking means that data is being sent from or
received at the interface.
ADSL LNK
OFF means ADSL is inactive. ON means ADSL is active.
Blinking means the interface is being trained. SYS
Blinking means that the system is properly
working.
Always ON or OFF means that the system is
incorrectly working
PWR OFF means that power is not being
supplied.
ON means that power is being supplied.