Installation Instructions

Router 3030 9
System specifications
LEDs
There are eight LEDs on the cover. The following table explains their meaning.
Port attributes
The Router 3030 provides one console port, four 10/100M Ethernet ports and one
ADSL over POTS port. The following table describes the attributes of ADSL over
POTS port.
Table 1 System specifications of Router 3030
Item
3030
Description
Port 1 console port 1 ADSL over POTS (Annex A)
Four 10/100M Ethernet port (LAN) Processor MPC859 50Mhz
SDRAM 64MB Flash Memory
8MB Maximum
power
consumption
12W
Power supply (external) Input rated voltage: 100-240V a.c.,
50/60Hz
Maximum tollerance 90-264V a.c., 50/60Hz Current:
0.5A~1A
Output
Voltage: 12V d.c. Current:‘4A Dimensions (W x H x D)
300mm (11.81in) X 180mm (7.1in) X
45mm (1.77in) (Maximum dimensions,
which are the highest arc points of the
plastic panel.)
Weight 1kg
Operating temperature 0 to 40*C Operating humidity
10 to 90% (noncondensing)
Table 2 LEDs of Router 3030
LED Description
LAN0/LAN1/LAN2/LAN3 OFF means that link is not set up.
ON means that link has been set up. Blinking means that data is being sent from or
received at the interface.
ADSL ACT OFF means that no data is being sent from or
received at the interface.
Blinking means that data is being sent
from or received at the interface.
ADSL LNK
OFF means ADSL is inactive. ON means ADSL is active.
Blinking means the interface is being
trained.
SYS
Blinking means that the system is
properly working.
Always ON or OFF means that the system is
incorrectly working.
PWR OFF means that power is not being supplied.
ON means that power is being
supplied.