Manual

Installing the V7111 in a 19-inch Rack
The V7111 is installed in a standard 19-inch rack by placing it on a shelf preinstalled in the
rack. The 19-inch rack shelf is not supplied in the standard package kit, but can be ordered
separately. For ordering and pricing, please contact your network distributor.
Figure 4 V7111 Rack Mount
1
2
Table 3 V7111 Rack Mount
Item # Functionality
1 Standard rack holes used to attach the shelf to the rack
2 Eight shelf-to-device screws
To install the V7111 in a 19-inch rack, follow these 3 steps:
1 Use the shelf-to-device screws found in the package to attach one or two V7111 devices
to the shelf.
2 Position the shelf in the rack and line up its side holes with the rack frame holes.
3 Use four standard rack screws (not supplied) to attach the shelf to the rack.
Cabling the V7111
Figure 5 illustrates the rear layout of the V7111. Table 4 lists and describes the rear panel
connectors and button on the V7111.
Cable your V7111 according to each section of
Table 5
16 3Com VCX V7111 Analog Gateway Installation Guide