Manual

When you have completed the above relevant sections you are then ready to start
configuring the gateway (see
Chapter 3: Configuring the V7111).
Unpacking
To unpack the V7111 24-PORT, follow these 6 steps:
1 Open the carton and remove packing materials.
2 Remove the V7111 24-PORT gateway from the carton.
3 Check that there is no equipment damage.
4 Check, retain and process any documents.
5 Notify 3Com or your local supplier of any damage or discrepancies.
6 Retain any diskettes or CDs.
Package Contents
Ensure that in addition to the V7111 24-PORT, the package contains:
 AC power cable.
 2 short equal-length brackets and bracket-to-device screws for the 19-inch rack
installation.
Mounting the V7111 24-PORT
The V7111 24-PORT can be mounted on a desktop or installed in a standard 19-inch rack.
See
Cabling the V7111 24-PORT for cabling the V7111 24-PORT.
Mounting the V7111 24-PORT on a Desktop
No brackets are required. Simply place the V7111 24-PORT on the desktop in the position
you require.
Figure 10 Desktop or Shelf Mounting
3Com VCX V7111 Analog Gateway Installation Guide 19