Manual

Figure 17 Client Configuration Screen with Blank Parameters
Assigning an IP Address Using the Voice Menu Guidance
To assign an IP address using the voice menu guidance, follow these 7 steps:
1 Connect a telephone to one of the FXS ports. Lift the handset and dial ***12345 (three
stars followed by the digits 1, 2, 3, 4, 5).
2 Wait for the 'configuration menu' voice prompt to be played.
3 To change the IP address, press 1 followed by the pound key (#).
 The current IP address of the gateway is played. Press # to change it.
 Dial the new IP address; use the star (*) key instead of dots ("."), e.g. 192*168*0*4
and press # to finish.
 Review the new IP address, and press 1 to save it.
4 To change the subnet mask, press 2 followed by the # key.
 The current subnet mask of the gateway is played. Press # to change it.
 Dial the new subnet mask; e.g. 255*255*0*0 and press # to finish.
 Review the new subnet mask, and press 1 to save it.
28 3Com VCX V7111 Analog Gateway Installation Guide