IP Phone User Manual

152 CHAPTER 5: CONFIGURING TELEPHONE COMMUNICATION SETTINGS
before you save a change to a setting, you exit the menu item without
saving the change.
7 Scroll Buttons — Moves up or down through the LUI menu and select
hex digits when editing a MAC address.
LUI Configuration Options for Business and Basic Telephones
Tabl e 20
describes each LUI utility menu item that appears in the LUI for
the Business and Basic Telephones.
Table 20 Business and Basic Telephone LUI Menu Items
Menu Option Description
1 View Settings Press 1 on the number pad and scroll to view these options:
MAC Address – MAC address of this telephone.
NCP MAC Address – MAC address of the primary call
processor.
SW Build Ident. – Software version running on this telephone.
Serial # Rev – Telephone serial number and hardware version.
Phone Port Speed – Speed and duplex setting of the LAN
connection.
PC Port Speed – The speed and duplex setting of the PC port to
the device, if any, connected to the port.
My IP Address – Active IP address of this telephone.
Subnet Mask – Active IP mask.
Gatwy IP Address –
Active default gateway IP address .
NCP IP Address – Active IP address of the call processor with
which this telephone communicates.
ALT SrvrIP – Active IP address of the secondary call processor.
VLAN Config – Enabled or disabled VLAN for this telephone,
acquired from either DHCP option 184 or a setting in the
telephone’s memory.
Mem- My IP Addr – The IP address configured in the
telephone’s memory though the LUI utility.
Mem- Subnet Mask – The IP mask configured in the
telephone’s memory though the LUI utility.
Mem- Gatwy IP – The default gateway IP address configured in
the telephone’s memory though the LUI utility.