IP Phone User Manual

158 CHAPTER 5: CONFIGURING TELEPHONE COMMUNICATION SETTINGS
Modify Display Displays a single option, Set Contrast, that allows you
change the LCD contrast on the Display Panel.
Configure IP Address
Configure Subnet
Mask
Configure Gateway
IP Address
Lets you specify the IP information for this telephone. If you
have a DHCP server, this information is automatically
provided by the server.
When entering an IP address:
■ Use the key pad to enter digits 0–9.
■ Use the Left button to delete the character to the left of
the cursor position. Use the Right button to highlight the
cursor position.
■ If any of the fields within the IP address contain only one
or two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
The interface automatically adds a period.
Press the button under the Save tab or press the # key to
commit your address change.
Configure NCP IP
Address
Lets you specify the IP address of the primary Network Call
Processor. This information is typically provided by using
DHCP option 184. You can, however, enter the IP address
manually.
See the description for Configure IP Address (above) for
information on entering IP data.
Table 21 Manager’s Telephone LUI Menu Items (continued)
Menu Option Description