Wireless LAN PC Card User Guide

36 CHAPTER A: WINDOWS NT INSTALLATION WITHOUT NETWORKING INSTALLED
14 Click Next.
The Windows NT Setup windows asks for the location of the Windows NT
installation files.
15 Remove the 3Com CD from the CD-ROM drive, put the Windows NT CD in the
drive and wait for it to spin up to speed. Make sure that the correct path to your
CD-ROM drive appears in the entry box (for example, d:) and click Continue.
(Instead of installing from the Windows NT CD, if you have the Windows NT
system files on your computer, you can enter the path to the Windows NT
installation files (for example, C:\i386) and click Continue.)
The Setup window appears again.
16 In the PC Card Setup window, accept the default settings and click Continue.
The default settings work in most cases. However, you may need to specify values
for your installation.
17 If the Microsoft TCP/IP Properties screen appears, enter the requested information
for your network environment.
Refer to the Windows NT documentation for assistance. If you choose the DHCP
server option, click Yes to the DHCP prompt. When you are finished entering the
appropriate TCP/IP information, click OK.
18 When the window for enabling or disabling bindings opens, click Next.
19 When Windows NT is ready to start the network, click Next to copy the network
files.
20 Enter your computer name and workgroup or domain name when prompted and
click Next.
21 When the system displays “Networking has been installed on this computer,” click
Finish.
22 When prompted to reboot the computer, remove the Windows NT CD from the
drive, insert the 3Com CD in the drive, and click Yes.
Install CardWizard
1 When the computer restarts, if the 3Com 11 Mbps WLAN Menu appears, click Exit.
2 At the prompt to install CardWizard, click Yes.
If you click No and you do not have CardWizard installed, the installation stops.
3 In the CardWizard window, click Next.
4 In the CardWizard Welcome page, click Next.
5 Read the CardWizard Software License Agreement and click Yes.
6 When prompted to remove the PC Card, eject the card and click Yes.
7 In the Select Type of Platform window, select your computer type and click Next.
If your computer type is not listed, select Other Notebook and click Next.
8 Respond to the prompts to install CardWizard.
If CardWizard was already installed before you began installing the PC Card, this
portion is skipped and the installation proceeds directly to “Set Up the PC Card”.