User Manual

Updating Ethernet Bridge Driver Software 35
9 In the next window, select the Driver tab.
10 Click Update Driver.
11 In the Upgrade Device Driver Wizard, follow the prompts to install the upgrade:
a In the Install Hardware Device Driver window, click the Display list of known
drivers so that I can choose a specific driver radio button and click Next.
b In the next window, click Have Disk. In the dialog box, specify the directory
where you downloaded the software and click Continue.
12 When the installation is finished, click Finish.
The 3Com 11 Mbps Wireless LAN Setup window appears, in which you specify the
Ethernet Bridge configuration.
13 In the 3Com 11 Mbps Wireless LAN Client Setup window, select Typical and
click Next.
For the fastest installation, it is recommended that you use the typical settings.
You can customize the configuration later. Typical configures the Ethernet Bridge
with the following default values:
WLAN Service Area—Attach to any WLAN Service Area automatically
Security Setting—No security (Open system)
14 In the Summary window, review the Ethernet Bridge setup. To install the software
utilities, check the Start client software installation when finished box.
15 If the 3Com WLAN Launcher is already running, it is recommended that you exit it
and end the Ethernet Bridge service routine:
a In the Windows system tray, right-click the 3Com icon and select Exit.
b Press Ctrl+Alt+Delete to bring up the Close Program window.
c In the Close Program window, select SR Services and click End Task.
16 Click Finish to complete the Ethernet Bridge setup and start the software
utilities installation.
The 3Com 11 Mbps Wireless LAN Setup program starts.
17 Read the Welcome page and click Next.
18 In the Setup Complete window, click Finish.
19 If you are prompted to restart your computer, do so.
The software is now updated.
Windows NT
1 Turn on the power to the computer and start Windows.
2 Log in to the Windows NT Administrator account.
3 From the Windows Start menu, select Settings, then select Control Panel.
4 Double-click the Network icon.
5 In the Network window, select the Adapters tab.
6 In the Adapters tab, click Update.
7 In the Windows NT Setup window, enter the path to the directory where you
downloaded the software and click Continue.