User Guide

4-4

Figure 4-6 Set terminal emulation in H3C Properties window

Powering On the AC

Checking Before Power-On

Before powering on the AC, verify that:

z The power cord is properly connected.

z The power supply voltage is within the range labeled on the AC.

z The console cable is properly connected; the terminal (for example, a PC) used for configuration

has been started; the configuration parameters have been set.

Powering On the AC

The following is information output by a WX5002 AC after it is powered on and started up.

*********************************************

* *

* H3C WCM BootWare , Ver 1.16 *

* *

*******************************************

Compiled date : May 6 2009, 20:21:15

CPU type : BCM1250

CPU L1 DCache : 32KB

CPU L1 ICache : 32KB

CPU L2 Cache : 512KB

CPU Clock Speed : 700MHz

Memory Type : DDR SDRAM

Memory Size : 1024MB