User Guide

5-4
You can try up to three times to type the BootWare password (the initial password is null). If you have
tried three times but the password is still incorrect, you need to reboot the system. After you type the
correct password, the system enters the BootWare main menu:
==================<EXTEND-BOOTWARE MENU>===================
| <1> Boot System |
| <2> Enter Serial SubMenu |
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Ignore System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |
| <0> Reboot |
===========================================================
Enter your choice (0-8):
The menu is described in the following table.
Table 5-1 BootWare main menu
Menu item Description
<1> Boot System Boot the system
<2> Enter Serial SubMenu
Enter the serial submenu. For detailed description,
refer to
Serial submenu.
<3> Enter Ethernet SubMenu
Enter the Ethernet submenu. For detailed description,
refer to
Ethernet submenu.
<4> File Control
File control submenu. For detailed description, refer to
File control submenu.
<5> Modify BootWare Password Modify the BootWare password.
<6> Ignore System Configuration Boot the system with the system configuration ignored
<7> BootWare Operation Menu
BootWare operation submenu. For detailed
description, refer to
BootWare operation submenu.
<8> Clear Super Password Clear the super password.
<0> Reboot Reboot the AC.
BootWare Submenus
Serial submenu
You can upgrade application programs, change the serial interface baud rate and so on through this
submenu.
Select 2 in the BootWare main menu to enter the serial submenu.
======================<SERIAL SUB-MENU>======================
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Update Backup Application File |
| <4> Update Secure Application File |