Datasheet

PS-Test

Calibration Instrument

Tests and calibrates all kinds of process instrumentation

using analog signals, including signal converters,

regulators, transmitters, indicating instruments etc.

Battery operation makes testing quick and easy, both

in field and laboratory environment.

Measuring and simulation of current

and / or voltage signals can be

done simultaneously on diffrent

channels.

High accuracy and resolution.

Easy to use.

The instrument is protected against

short circuit and transients.

The instrument is equipped with a

LCD display, for easy reading.

Net adaptable with special transformer

(230 V)

Compact design: 80 x 160 x 32 mm.

PAGE 1
PS-Test Calibration Instrument Tests and calibrates all kinds of process instrumentation using analog signals, including signal converters, regulators, transmitters, indicating instruments etc. Battery operation makes testing quick and easy, both in field and laboratory environment. Measuring and simulation of current and / or voltage signals can be done simultaneously on diffrent channels. High accuracy and resolution. Easy to use. The instrument is protected against short circuit and transients.
PAGE 2
Technical Data Output Select range with the OUT switch and adjust the signal with the 10-turn potentiometer. The selected output signal is maintained even when the display switch is turned to IN. The outlet is short-circuit proof, has a transient protection and a 500 mAF fuse. Signal Tolerance Resolution Notes 0-20mA <±0,1%, ±1 digit 10uA Max load 500 Ω 0-12VDC <±0,1%, ±1 digit 10mV Max current 40mA Input Signal Select range with the IN switch.