Two-Way Radio User Manual

*
JOINT PL ASTICITY
7. First field variable.
8. Second field variable.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than two):
1. Third field variable.
2. Etc., up to eight field variables per line.
Repeat this s et of data lines as often as nec essary to defi ne the plastic behavior as a function of
temperature and other predefined field variables.
Data lines for TYPE=CLAY:
First line:
1. , undrained shear strength of the clay.
2. a, hardening parameter.
3. b, hardening parameter.
4. c, hardening parameter.
5. Temperature.
6. First field variable.
7. Second field variable.
8. Third field variable.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than three):
1. Fourth field variable.
2. Etc., up to eight field variables per line.
Repeat this s et of data lines as often as nec essary to defi ne the plastic behavior as a function of
temperature and other predefined field variables.
Data lines for TYPE=MEMBER:
First line:
1. , compressive capacity.
2.
, tensile capacity.
3.
, horizontal capacity.
4.
, m oment capacity.
5. Temperature.
6. First field variable.
7. Second field variable.
8. Third field variable.
10.3–2
ABAQUS Version 6.1 Module:
ID:
Printed on: