Two-Way Radio User Manual

MODAL OUTPUT

13.13

MODAL OUTPUT: Write generalized coordinate (modal amplitude) data to the output

database during a mode-based dynamic or complex eigenvalue extraction procedure.

This option is used during a mode-based dynamic or com plex eigenvalue extraction procedure to write

generalized coordinate (m odal amplitude and phase) values to the ABAQUS/Standard output database. It

must be used in conjunct ion with the

OUTPUT, HISTORY option.

Product: ABAQUS/Standard

Type: History data

Level: Step

References:

•

“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual

• *

OUTPUT

Optional parameter:

VA R I A B L E

Set VARIABLE=ALL to indicate that all modal variables applicable to this procedure and m aterial

type should be written to the output database.

If this parameter is omitted, the modal variables requested for output must be speciﬁed on the

data lines.

Data lines to request modal output:

First line:

1. Give the identifying keys for the variables to be written to the output database. The keys are

deﬁned in the “Modal variables” section of “ABAQUS/Standard output variable identiﬁers,”

Section 4.2.1 of the ABAQUS Analysis User’s Manual.

Repeat this data line as often as necessary to deﬁne the modal variables to be written to the output

database.

13.13–1

ABAQUS Version 6.1 Module:

ID:

Printed on: