Two-Way Radio User Manual

*
MOHR COU LOMB HARDENING
13.17
*
MOHR COULOMB HARDENING: Specify hardening for the Mohr-Coulomb plasticity
model.
This option is used to define piecewise linear hardening/softening behavior for a m aterial defined by the Mohr-
Coulomb plasticity model. It must be used in conjunction with the
*
MOHR COULOMB option.
Product: ABAQUS/Standard
Type: Model data
Level: Model
References:
•
“Mohr-Coulom b plasticity,” Section 18.3.3 of the ABAQ US Analysis User’s M anual
• *
MOHR COULOMB
Optional parameter:
DEPENDENCIES
Set this parameter equal to the number of field variable dependencies included in the definition of
the cohesion yield stress, in addition t o temperature. If this parameter is omitted, it is assume d
that the cohesion yield stress depends only on the plastic strain and, possibly, on temperature.
See “Specifying field variable dependence” in “Material data definition,” Section 16.1.2 of the
ABAQUS Analysis User’s Manual, for more information.
Data lines to define Mohr-Coulomb hardening:
First line:
1. Cohesion yield stress.
2. Absolute value of the corresponding plastic strain. (The first tabular value entered must always
be zero.)
3. Temperature.
4. First field variable.
5. Second field variable.
6. Etc.,uptofivefieldvariables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):
1. Sixth field variable.
13.17–1
ABAQUS Version 6.1 Module:
ID:
Printed on: