Two-Way Radio User Manual

*
M2
13.25
*
M2: Define the second bending moment behavior of beams.
This option is used to define the second bending moment behavior of beams. It can be used only in conjunction
with the
*
BEAM GENERAL SECTION, SECTION=NONLINEAR GENERA L option and is needed only
for beams in space.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
•
“Using a general beam section to define the section behavior,” Section 23.3.7 of the ABAQUS Analysis
User’s Manual
• *
BEAM GENERAL SECTION
Optional parameters (if neither ELASTIC nor LINEAR is included, elastic-plastic response is
assumed):
DEPENDENCIES
Set this parameter equal to the num ber of field variable dependencies included in the
moment–curvature relationship, in addition to temperature. If this parameter is omitted, it is
assumed that the moment–curvature re lationship is consta nt or depends only on temperature.
See “Specifying field variable dependence” in “Material data definition,” Section 16.1.2 of the
ABAQUS Analysis User’s Manual, for more information.
ELASTIC
Include this parameter if the bending moment–c urvature relationship is nonlinear but elastic.
LINEAR
Include this parameter if the bending m om ent varies linearly with curvature.
Data lines if the LINEAR par ameter is included:
First line:
1. Bending stiffness of the section about the second beam section local axis.
2. Temperature.
3. First field variable.
4. Second field variable.
5. Etc., up to six field variables.
13.25–1
ABAQUS Version 6.1 Module:
ID:
Printed on: