Two-Way Radio User Manual

NODE OUTPUT

Optional parameter:

VA R I A B L E

Set VARIABLE=ALL to indicate that all nodal variables applicable to this procedure and material

type should be written to the output database.

Set VARIABLE=PRESELECT to indicate that the default nodal output variables for the

current procedure type should be written to the output database. Additional output variables can

be requested on the data lines.

If this parameter is omitted, the nodal variables requested for output must be speciﬁed on the

data lines.

Data lines to request nodal output:

First line:

1. Specify the identifying keys for the variables to be written to the output database. The

keys are deﬁned in “ABAQUS/Standard output variable identiﬁers,” Section 4.2.1 of the

ABAQUS Analysis User’s Manual, and “ABAQUS/Explicit output variable identiﬁers,”

Section 4.2.2 of the ABAQUS Analysis User’s Manual.

Repeat this data line as often as necessary to deﬁne the nodal variables to be written to the output

database.

14.10–2

ABAQUS Version 6.1 Module:

ID:

Printed on: