Two-Way Radio User Manual

*
OUTPUT
15.3
*
OUTPUT: Define output requests to the output database.
This option is used to write contact, element, energy, nodal, or diagnostic output to th e output data base. In
an ABAQUS/Standard analysis it is also used to write modal or radiation output to the output database. In
an ABAQUS/Explicit analysis it is also used to write incrementation ou tput to the output database. The
*
CONTACT OUTPUT,
*
ELEMENT OUTPUT,
*
ENERGY OUTPUT,
*
INCREMENTATION OUTPUT,
*
MODAL OUTPUT,
*
NODE OUTPUT, and/or
*
RADIATION OUTPUT options can be used in conjunction
with this option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
Using
*
OUTPUT in an ABAQUS/Standard analysis
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the ABAQUS Analysis User ’s Manual
•
“Overview of job diagnostics,” Section 23.1 of the ABAQUS/CAE User’s Manual
• *
CONTACT OUTPUT
• *
ELEMENT OUTPUT
• *
ENERGY OUTPUT
• *
MODAL OUTPUT
• *
NODE OUTPUT
• *
RADIATION OUTPUT
• *
TIME POINTS
One of the following mutually exclusive parameters is required:
DIAGNOSTICS
Set DIAGNOSTICS=YES (default) to indicate that detailed diagnostic information should be
written to the output database. Set DIAGN OSTICS=NO to suppress the output.
FIELD
Include this parameter to ind icate that the output requests used in conjunction with the
*
OUTPUT
option will be written to the output database as field- type output.
15.3–1
ABAQUS Version 6.1 Module:
ID:
Printed on: