Two-Way Radio User Manual

*
OUTPUT
Using
*
OUTPUT in an ABAQUS/Explicit analysis
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“ABAQUS/Explicit output variable identifiers,” Section 4.2.2 of the A BAQ US Analysis User ’s Manual
•
“Overview of job diagnostics,” Section 23.1 of the ABAQUS/CAE User’s Manual
• *
CONTACT OUTPUT
• *
ELEMENT OUTPUT
• *
ENERGY OUTPUT
• *
INCREMENTATION OUTPUT
• *
NODE OUTPUT
• *
TIME POINTS
One of the following mutually exclusive parameters is required:
FIELD
Include this parameter to ind icate that the output requests used in conjunction with the
*
OUTPUT
option will be written to the output database as field- type output.
HISTORY
Include this parameter to ind icate that the output requests used in conjunction with the
*
OUTPUT
option will be written to the outp ut database as history-type output.
The following parameters are optional and valid only if the FIELD parameter is included:
NUMBER INTERVAL
Set this parameter equal to the number of interva ls during the step at which the output database
states are to be writ ten. ABAQUS/Explicit will alway s write the results at the beginning of the
step. For example, if NUMBER INTERVAL=10, ABAQUS/Explicit will write 11 output database
states consisting of the values a t the beginning of the step and the values at the end of 10 intervals
throughout the step. The value of this parameter must be a positive integer or zero. A value of zero
suppresses all output. If this parameter is omitted, its value will be set to 20.
The NUMBER INTERVAL and TIME POINTS parameters are m utually exclusive.
TIME MARKS
Set TIME MARKS=NO (default) to write results to the output database at the increment ending
imm ediately after the time dictated by the NUMBER INTERVAL or TIME POINTS parameter.
Set TIME MARK S=YES to write results at the exact tim es dictated by the NUMBER
INTERVAL or TIME POINTS parameter.
TIME MARKS=YES cannot be used when either the FIXED TIME INCREMENTATION or
DIRECT USER CONTROL parameter is included on the
*
DYNAMIC option.
15.3–4
ABAQUS Version 6.1 Module:
ID:
Printed on: