Two-Way Radio User Manual

*
PERMEABILITY
6. .
7. Void ratio, e.
8. Temperature,
.
Subsequent lines (only needed if the DEPENDENCIES parameter is specified):
1. First field variable.
2. Second field variable.
3. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessar y to define the variation.
Data lines to define the dependence of permeability on saturation of the wetting liquid, k
s
(s)
(TYPE=SATURATION):
First line:
1. . (Dimensionless.)
2. Saturation, s. (Dimensionless.)
Repeat this data line as often as necessary to define the variation. The table must provide at
.
Data lines to define the velocity coefficient, b(e) (TYPE=VELOCITY):
First line:
1. . (Units of TL
−1
.) Only is allowed.
2. Void ratio, e.
Repeat this data line as often as necessary to define the variation.
16.6–3
ABAQUS Version 6.1 Module:
ID:
Printed on: