Two-Way Radio User Manual

*
PLANAR TEST DATA
3. Nominal transverse strain, . Default is zero. Not needed if the POISSON parameter is
specifiedonthe
*
HYPERFOAM option.
Repeat this data line as often as necessary to give the stress-strain data.
Using planar test data to define the Mullins effect material model
References:
•
“Mullins effect in rubberlike materials,” Section 17.6.1 of the ABAQUS Analysis User’s Manual
•
“Energy dissipation in elastomeric foams,” Section 17.6.2 of the ABAQUS Analysis U ser’s Manual
• *
MULLINS EFFECT
There are no parameters associated with this option.
Data lines to specify planar test data for defining the unloading-reloading response of the
Mullins effect material model:
First line:
1. Nominal stress, .
2. Nominal strain in the dir ection of loading,
.
Repeat this data line as often as necessary to give the stress-strain data.
16.11–3
ABAQUS Version 6.1 Module:
ID:
Printed on: