Two-Way Radio User Manual

*
PLASTIC M2
16.15
*
PLASTIC M2: Define the second plastic bending moment behavior for frame
elements.
This option can be used only in conjunction with the
*
FRAME SECTION option and is availa ble only for
FRAME3D elements. It describes the bending moment in a frame element as a function of the plastic rotation
about the second cross-section direction.
Product: ABAQUS/Standard
Type: Model data
Level: Part, Part instance
References:
•
“Frame section behavior,” Section 23.4.2 of the AB AQU S Analysis User’s Manual
• *
FRAME SECTION
There are no parameters associated with this option.
Data lines to define the variation of yield moment M
2
0
with plastic rotation:
First line:
1. Bending yield moment about the second cross-section direction.
2. Plastic rotation about the second cross-section dir ection.
Repeat this data line as often as necessary to define the relationship between the bending moment and
the plastic rotation about the second cross-section axis. At least three pairs of data are required.
16.15–1
ABAQUS Version 6.1 Module:
ID:
Printed on: