Two-Way Radio User Manual

*
POROUS ELASTIC
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of the material parameters
, G, and on temperature and field variables.
Data lines to define the instantaneous shear modulus from the bulk modulus and Poisson’s ratio:
First line:
1. Value of the logarithmic bulk modulus, . (Dim ensionless.)
2. Value of Poisson’s ratio,
.
3. Value of the elastic tensile limit,
. (This value cannot be negati ve.)
4. Temperature,
.
5. First field variable.
6. Etc., up to four field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than four):
1. Fifth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of the material parameters
, , and on temperature and field variables.
16.18–2
ABAQUS Version 6.1 Module:
ID:
Printed on: