Two-Way Radio User Manual

*
PREPRINT
16.23
*
PREPRINT: Select printout for the analysis input file processor.
This option is used to select the printout that will be obtained from the analysis input file processor.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
Reference:
•
“Output,” Section 4.1.1 of the ABAQUS Analysis User’s Manual
Optional parameters:
CONTACT
This parameter applies only to ABAQUS/Standard analyses.
Set CONTACT=Y ES to print detailed information about the contact constraints generated by
the contact pair definition data. Se t CONTACT=NO (default) to suppress this printout.
ECHO
Set ECHO=YES to print an echo of the input data. Set ECHO=NO (default) to suppress this printout.
HISTORY
Set HISTORY=YES to print h istory data. Set HISTORY=NO (default) to suppress this printout.
MODEL
Set MODEL=YES to print m odel definition data. Set M ODEL=NO (default) to suppress this
printout.
PARSUBSTITUTION
Set PARSUBSTITUTION=YES to print the modified version of the original input file that is free
of input model param etrization. Set PAR SUBSTITUTION=NO (default) to suppress this printout.
PARVALUES
Set PARVA LUES=YES to print a modified version of the original input file showing the parameters
used for model parametrization and their values. Set PARVA LUES=NO (default) to suppress this
printout.
There are no data lines associated with this option.
16.23–1
ABAQUS Version 6.1 Module:
ID:
Printed on: