Two-Way Radio User Manual

*
PRINT
RESIDUAL
Set RESIDUAL=YES (default) if the output of equilibrium residuals is to be given during the
equilibrium iterations. Set RESIDUAL=NO to suppress the output.
SOLVE
Set SOLVE=YES to request information regarding the actual number of equations and the m emory
requirement in each iteration. The default is SOLVE=NO.
Optional parameters in ABAQUS/Explicit analyses:
ALLKE
Set ALLKE=YES to r equest that a column containing the total kinetic energy be printed in the status
file. Set ALLKE=NO to suppress this printout. The default is ALLKE=YES.
CRITICAL ELEMENT
Set C RITICAL ELEMENT=YES to request that a colum n listing the element that has the smallest
stable time increment and a column listing the value be printed in the status file. Set CRITICAL
ELEMENT=NO to suppress this printout. The default is CRITICAL ELEMENT=YES.
DMASS
Set DMASS=YES to re quest that a column containing the percent change in total mass of the model
due to mass scaling be printed in the status file. Set DMASS=NO to suppress this printout. The
default is DMASS=NO unless active mass scaling is p resent in the step.
*
FIXED MASS SCALING
propagated from a previous step is not considered to be active mass scaling.
ETOTAL
Set ETOTAL= YES to request that a column containing the energy balance of the model be printed
in the status file. Set ETOTAL=NO to suppress this printout. The default is ETOTAL=NO.
There are no data lines associated with this option.
16.28–2
ABAQUS Version 6.1 Module:
ID:
Printed on: