Two-Way Radio User Manual

IMPORT

the analysis is to be imported. If this param eter is omitted, the analysis is imported from the last

available interval of the speciﬁed step.

ITERATION

This parameter is relevant only when the results are imported from a previous direct cyclic

ABAQUS/Standard analysis.

When importing an analysis from ABAQUS/Standard in to ABAQUS/Explicit or from one

ABAQUS/Standard analysis into another ABAQUS/Standa rd analysis, set this parameter equal to

the iteration number of the speciﬁed step on the ABAQUS/Standard restart ﬁle from which the

analysis is to be imported. Since rest art information can be written only at the end of an iteration in

a direct cyclic analysis, the INCREMENT parameter is irrelevant and is ignored if the ITERATION

parameter is speciﬁed. If this param eter is omitted, the analysis is imported from the last available

iteration of the speciﬁed step.

Optional parameters:

STATE

Set STATE=YES (default) to im port the current material state of the elements at the speciﬁed step

and the speciﬁed interval, increm ent, or iteration.

Set STATE=NO if no material state is to be imported. In this case the elements will start with

no initial state or with the state as deﬁned by the

INITIAL CONDITIONS option.

STEP

Set this parameter equal to the step on the ABAQUS/Explicit state ﬁle or on the ABAQUS/Standard

restart ﬁle from which the analysis is being imported. If this parameter is omitted , the analysis is

imported from the last available step on the state ﬁle or the restart ﬁle at the speciﬁed increment,

interval, or iteration.

Data lines to specify element sets to be imported:

First line:

1. List of elem ent sets that are to be imported. Specify only element set names that are used

to deﬁne the section properties in the previous ABAQU S/Explicit or ABAQUS/Standard

analysis.

Repeat this data line as often as necessary to deﬁne the element sets to be imported. Up to 16 element

sets can be listed per data line.

There are no data lines for importing a part instance.

9.4–2

ABAQUS Version 6.1 Module:

ID:

Printed on: