Two-Way Radio User Manual

*
SOLID SECTION
18.22
*
SOLID SECTION: Specify element properties for solid, infinite, acoustic, and truss
elements.
This option is us ed to define pro perties of solid (continuum) elements, infinite elements, acoustic finite and
infinite elements, and truss elements.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
•
“Solid (continuum) elements,” Section 22.1.1 of the ABAQUS Analysis User’s Manual
•
“Infinite elements,” Section 22.2.1 of the ABAQUS Analysis User’s Manual
•
“Truss elements,” Section 23.2.1 of the ABAQUS Analysis User’s Manual
Required parameters:
COMPOSITE
This parameter applies only to ABAQUS/Standard analyses.
This parameter can be used only with three-dimensional brick solid elements that have only
displacement degrees of freedom. Include this param eter if the solid is made up of several layers
of material.
The COMPOSITE and MATERIAL param eters are mutually exclusive.
ELSET
Set this parameter equal to the name of the element set containing the elements for which the material
behavior is being defined.
MATERIAL
Set this parameter equal to the name of the material to be used with these elements.
The COMPOSITE and MATERIAL param eters are mutually exclusive.
REF NODE
This parameter is required only for g eneralized plane strain elements and acoustic infinite elements;
it is ignored for all other element types.
Set this parameter equal to either the node number of the reference node or the nam e of a node
set containing the reference node. If t he name of a node set is chosen, the node set m ust contain
exactly one node.
18.22–1
ABAQUS Version 6.1 Module:
ID:
Printed on: