Two-Way Radio User Manual

*
STATIC
3. Minim um time increment allowed. O nly used for automatic time increm entation. If
ABAQUS/Standard finds it needs a smaller time incre ment than this value, the analysis is
terminated. If this entry is zero, a default value of the smaller of the suggested initial time
increment or 10
−5
times the total time period is assumed.
4. Maximum time increment allowed. Only used for automatic time incrementation. If this value
is not specified, no upper limit is im posed.
Data line for the Riks method:
First (and only) line:
1. Initial increm ent in arc length along the static equilibrium path in scaled load-displacem ent
space,
. If the DIRECT param eter is used, this value will be used as a constant arc length
increment. If this entry is zero or is not specified, a default value that is equal to the total arc
length of the step is as sumed.
2. Total arc length scale factor associated with this step,
. If this entry is zero or is not
specified, a default value of
is assumed.
3. Minimum arc length increment,
. If this entry is zero, a default value of the sm aller of
the suggested initial arc length or 10
−5
times the total arc length is assum ed.
4. Maximum arc length increment,
. If this value is not spe cified, no upper limit is imposed.
5. Maximum value of the load proportionality factor,
. This value is used to terminate the
step when the load exceeds a certain m agnitude.
6. Node number at which the finishing displacement value is being monitored.
7. Degree of freedom being monitored.
8. Value of the total displacement (or rotation) at the node and degree of freedom that, if crossed
during an increment, ends the step at the c urrent increment.
18.31–3
ABAQUS Version 6.1 Module:
ID:
Printed on: