Two-Way Radio User Manual

*
INCIDENT WAVE INTERACTION PROPERTY
9.11
*
INCIDENT WAVE INTERACTION PROPERTY: Define the geome tric data and fluid
properties describing an incident wave.
This option defines the geometric data and fluid properties used to define incident waves. Each
*
INCIDENT
WAVE INTERACTION option must refer to an
*
INCIDENT WAVE INTERACTION PROPERTY definition.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
•
“Acoustic loads,” Section 27.4.5 of the ABAQUS Analysis User’s Manual
• *
INCIDENT WAVE INTERACTION
• *
UNDEX CHARGE PROPERTY
Required parameter:
NAME
Set this parameter equal to a label that will be used to refer to the incident wave interaction property
in the
*
INCIDENT WAVE INTERACTION option.
Optional parameter:
TYPE
Set TYPE=PLANE (default) to specify a planar incident wave.
Set TYPE=SPHERE to specify a spherical incident wave.
Data line to define an incident wave interaction proper ty:
First (and only) line:
1. , the speed of so und in the fluid, defining the rate of propagation of the wave.
2.
, the fluid mass density.
9.11–1
ABAQUS Version 6.1 Module:
ID:
Printed on: