Two-Way Radio User Manual

*
SUBSTRUCTURE COPY
18.38
*
SUBSTRUCTURE COPY: Copy a substructure definition.
This option is used to copy a substructu re definition from one library to another or from one substructure
identifier to another within one library.
Product: ABAQUS/Standard
Type: Model data
Level: This option is not supported in a model defined in terms of an assembly of part instances.
Reference:
•
“Using substructures,” Section 10.1.1 of the ABAQ US Analysis User’s Manual
Required parameters:
NEW TYPE
Set this param eter equal to the TYPE identifier of the substructure being created.
OLD TYPE
Set this param eter equal to the TYPE identifier of the substructure being copied.
Optional parameters:
NEW LIBRARY
Set this parameter equal to the name of the substructure library in which the substructure is stored.
The default library n ame is jobname.
OLD LIBRARY
Set this parameter equal to the name of the substructure library from which the substructure is being
copied. The default library na me is jobname.
There are no data lines associated with this option.
18.38–1
ABAQUS Version 6.1 Module:
ID:
Printed on: