Two-Way Radio User Manual

*
SUBSTRUCTURE GENERATE
18.41
*
SUBSTRUCTURE GENERATE: Substructure generation analysis.
This option is used to indicate that the step should be analyzed as a substructure generation step.
Product: ABAQUS/Standard
Type: History data
Level: This option is not supported in a model defined in terms of an assembly of part instances.
Reference:
•
“Defining substructures,” Section 10.1.2 of the ABAQUS Analysis User’s Manual
Required parameter:
TYPE
Set this parameter equal to the identifier to be assigned to this substructure in a substructure library.
The identifier must be Z followed by a number that cannot exceed 9999.
Substructure identifiers must be unique within a library. If a substruct ure already exists in
the library with this same identifier, the analysis will terminate with an error message unless the
OVERWRITE parameter is specified.
Optional parameters:
GRAVITY LOAD
Set GRAVITY LO AD=Y ES to calculate the substructure’s gravity load vectors. The default is
GRAVITY LOAD=NO.
LIBRARY
Set this parameter equal to the name of the substructure library on which the substructure data will
be written. See “Input syntax rules,” Section 1.2.1 of the ABAQUS A nalysis User’s Manual, for
the syntax of such library names. The default library name is jobname.
MASS MATRIX
Set MASS MATRIX=YES to calculate the substructure’s reduced mass matrix. The default is
MASS MATRIX=NO.
OVERWRITE
Include this parameter to overwrite an existing substructure with the same TYPE identifier in the
library. The default is no overwrite.
18.41–1
ABAQUS Version 6.1 Module:
ID:
Printed on: